The Cost of Driving From Coral Springs, Florida to Stuart, Florida

Are you planning a trip from Coral Springs to Stuart, Florida? Whether you're heading there for a weekend getaway or to visit family, it's important to factor in the cost of driving. We'll break down the cost of different routes based on current gas and toll prices, so you can budget accordingly.

Route 1: I-95 N

The most straightforward route from Coral Springs to Stuart is taking I-95 N. This route covers a distance of approximately 100 miles and typically takes around 1 hour and 30 minutes to 2 hours to drive, depending on traffic. With gas prices averaging around $3.00 per gallon and a car that gets 25 miles per gallon, the cost of gas for this route would be around $12.00 one way. Additionally, there are a few tolls along the way, costing a total of $8.00.

Route 2: Florida's Turnpike

Another route to consider is taking Florida's Turnpike. This route is slightly longer at about 110 miles, but it may be a more scenic option for your drive. The time it takes to drive this route is similar to I-95 N. The cost of gas would also be around $13.20 one way, with the total cost of tolls amounting to $14.00.

Route 3: Scenic Route

If you're in the mood for a more leisurely drive, you can opt for a scenic route that takes you through smaller towns and picturesque landscapes. This route adds some extra distance, totaling around 120 miles. It may take a bit longer, around 2 to 2.5 hours due to additional stops and lower speed limits in some areas. The cost of gas for this route would be approximately $14.40 one way, while there are no tolls to worry about.

Keep in mind that these cost estimates are based on current gas prices, so it's always a good idea to check for any fluctuations before you hit the road. Safe travels!