meetways logo
  • Home
  • About Us
  • Meet Business
  • Mobile
  • Contact Us

Driving Cost from Clinton, New Jersey to Downingtown, Pennsylvania

  • Halfway Point
  • Points of Interest
  • Travel Time
  • Travel Cost
A picture depicting a gas pump

The Cost of a Trip from Clinton, New Jersey to Downingtown, Pennsylvania

When planning a trip between Clinton, New Jersey and Downingtown, Pennsylvania, one of the most important factors to consider is the cost of the journey. With gas prices fluctuating constantly, it's important to calculate the cost of the trip accurately in order to budget accordingly. In this article, we will explore the different possible routes between these two destinations and highlight the cost and distance of each one, taking into account current gas prices. By the end of this article, you will have a clear understanding of the cost of a trip between Clinton, New Jersey and Downingtown, Pennsylvania, and the most efficient route to take.

Possible Routes and their Cost

Route 1: via I-78 W and I-476 S (Approx. 85 miles)

The first possible route between Clinton, New Jersey and Downingtown, Pennsylvania is via I-78 W and I-476 S. This route covers an approximate distance of 85 miles and usually takes about 1 hour and 30 minutes to 2 hours, depending on traffic conditions. At the current average gas price of $2.80 per gallon, a typical car with a fuel efficiency of 25 miles per gallon would require around 3.4 gallons of gas for this journey, costing approximately $9.52 one way.

Route 2: via US-202 S (Approx. 90 miles)

Another possible route is via US-202 S, which covers an approximate distance of 90 miles and typically takes about 1 hour and 40 minutes to 2 hours, depending on traffic conditions. Using the same average gas price of $2.80 per gallon and a fuel efficiency of 25 miles per gallon, this route would require approximately 3.6 gallons of gas, costing around $10.08 one way.

Route 3: via NJ-31 S and US-202 S (Approx. 95 miles)

The third possible route is via NJ-31 S and US-202 S, covering an approximate distance of 95 miles and typically taking about 1 hour and 45 minutes to 2 hours and 15 minutes, depending on traffic conditions. With the same average gas price and a fuel efficiency of 25 miles per gallon, this route would require approximately 3.8 gallons of gas, costing around $10.64 one way.

Recommendation

Based on the cost and distance of each route, the most cost-effective and efficient route between Clinton, New Jersey and Downingtown, Pennsylvania is via I-78 W and I-476 S. This route not only covers the shortest distance at 85 miles, but it also requires the least amount of gas, costing approximately $9.52 one way. Additionally, the travel time for this route is relatively shorter compared to the other options, making it the most favorable choice for budget-conscious travelers.

Conclusion

In conclusion, the cost of a trip between Clinton, New Jersey and Downingtown, Pennsylvania can vary depending on the route taken and the current gas prices. After evaluating the different possible routes and their associated costs, it is clear that the most cost-effective and efficient route is via I-78 W and I-476 S, which covers an approximate distance of 85 miles and requires around $9.52 worth of gas one way. With this knowledge in mind, travelers can plan their budget accordingly and make informed decisions when embarking on this journey.

56,575,914 Halfway points found so far

;

Making finding a middle point between two address easier than ever.

  • About Us
  • List of Countries
  • Our Team
  • Press
  • Meet Business
  • MeetWays Mobile
  • Contact Us
  • Frequently Asked Questions
  • Meeting Points
  • Popular Searches
  • Site Map
  • Privacy Policy
  • Terms of Service

meetways.com © 2008 - 2025 Arandola, LLC