The Cost of a Trip: Driving from Clinton, Massachusetts to Vernon, Connecticut

When planning a road trip, one of the key considerations is the cost. From fuel to tolls, there are several factors to take into account. For those traveling between Clinton, Massachusetts and Vernon, Connecticut, the cost of the trip can vary depending on the route chosen and current gas prices. Here, we'll break down the potential routes, highlight the cost and distance of each one, and recommend the best route based on current gas prices.

Route 1: I-90 W and I-84 E (Approximately 84 miles)

One possible route from Clinton, Massachusetts to Vernon, Connecticut is to take I-90 W and then I-84 E. This route takes approximately 1 hour and 20 minutes without traffic, covering a distance of about 84 miles.

Based on the current average gas price of $3.00 per gallon, a vehicle with an average fuel efficiency of 25 miles per gallon would require approximately 3.36 gallons of gas for this route. This brings the total cost of gas to around $10.08 one way.

In addition to the cost of gas, drivers should also factor in any tolls along the way. For this route, drivers can expect to encounter tolls on the Massachusetts Turnpike (I-90) and potentially on I-84 in Connecticut.

Route 2: MA-2 W and I-190 S (Approximately 80 miles)

Another option for travelers is to take MA-2 W and then I-190 S before merging onto I-84 E towards Vernon, Connecticut. This route covers approximately 80 miles and takes around 1 hour and 30 minutes without traffic.

Using the same average gas price and fuel efficiency as in Route 1, the cost of gas for this route would be approximately $9.60 one way. Similarly, drivers should also be mindful of any tolls along MA-2 and I-190.

Route 3: I-495 S and I-290 S (Approximately 75 miles)

Finally, drivers can opt to take I-495 S and then I-290 S before connecting to I-90 W and I-84 E towards Vernon, Connecticut. This route spans approximately 75 miles and takes about 1 hour and 25 minutes without traffic.

For this route, the cost of gas would be approximately $9.00 one way based on the current average gas price and fuel efficiency. Tolls may also be present on I-90 and potentially on I-84.

Recommended Route

Based on the cost of gas and the distance traveled, Route 3 (I-495 S and I-290 S) appears to be the most cost-effective option for the trip between Clinton, Massachusetts and Vernon, Connecticut. While the difference in cost between the routes is relatively minor, Route 3 also offers a slightly shorter distance and travel time compared to the other options.

Conclusion

In conclusion, the cost of a trip between Clinton, Massachusetts and Vernon, Connecticut can vary depending on the route chosen and current gas prices. Considering the average gas price of $3.00 per gallon and an average fuel efficiency of 25 miles per gallon, the cost of gas for the recommended Route 3 is approximately $9.00 one way. With a distance of about 75 miles, this route takes around 1 hour and 25 minutes without traffic. Ultimately, the recommended route offers a balance of cost-effectiveness and efficiency for travelers making the journey between these two locations.