The Cost of a Trip: Exploring Routes between New Rochelle and Elmsford

If you're planning a trip from the City of New Rochelle to the Village of Elmsford in New York, you might be wondering about the various routes available and their associated costs. With fluctuating gas prices, it's essential to consider the most economical options. This article will break down the different possible routes, highlight their costs, distances, and recommend the best route for your journey.

Route 1: Via I-95 and I-287

The first route from New Rochelle to Elmsford spans approximately 19 miles and takes around 30 minutes in moderate traffic conditions. To begin, you will merge onto I-95 N from Pelham Rd. Stay on I-95 N for about 11 miles until you reach exit 21 to I-287 W towards White Plains/Tappan Zee Bridge. After driving for around 6 miles on I-287 W, take exit 2 toward Elmsford/Sawmill Pkwy. This will lead you onto State Route 119, which will take you directly into Elmsford.

Using the current average gas price in New York of $2.85 per gallon and considering an average vehicle fuel efficiency of 25 miles per gallon, the estimated cost for this route (one-way) would be:

Cost = (Distance ÷ Miles per Gallon) × Gas Price = (19 ÷ 25) × $2.85 = $2.17

Route 2: Via Bronx River Parkway and I-287

The second route to consider is a slightly longer option that spans approximately 21 miles and takes around 35 minutes in moderate traffic conditions. This route provides a more scenic drive through the neighborhoods along the Bronx River. To start, you will take North Ave and Main St to Palmer Ave. From Palmer Ave, take a right onto Bronx River Rd, which will merge with the Bronx River Parkway. Continue on the Bronx River Parkway for approximately 10 miles until you reach exit 21 to I-287 W towards White Plains. After driving 8 miles on I-287 W, take exit 2 toward Elmsford/Sawmill Pkwy. This route also leads you onto State Route 119, which will take you into Elmsford.

Considering the same factors as the previous route, the estimated one-way cost for this option would be:

Cost = (Distance ÷ Miles per Gallon) × Gas Price = (21 ÷ 25) × $2.85 = $2.74

Route 3: Via I-95, Cross County Parkway, and Route 9A

The third route offers approximately 20 miles of driving and takes around 35 minutes in moderate traffic conditions. To initiate this journey, merge onto I-95 N from Pelham Rd, and travel for about 6 miles. Take exit 9 for Cross County Parkway toward Hutchinson River Pkwy/Westchester Ave. Continue on Cross County Parkway for about 3 miles and then take exit 6 toward South Central Ave. Merge onto South Central Park Ave and continue for around 4 miles until you reach Route 9A. Take a left on Route 9A and continue for approximately 7 miles until you reach your destination in Elmsford.

Considering the same gas price and vehicle fuel efficiency as mentioned earlier, the estimated one-way cost for this route would be:

Cost = (Distance ÷ Miles per Gallon) × Gas Price = (20 ÷ 25) × $2.85 = $2.28

Route 4: Via Hutchinson River Parkway and I-287

The fourth route slightly differs from the previous options, covering approximately 21 miles and taking around 40 minutes during moderate traffic. To follow this route, you will need to merge onto I-95 N from Pelham Rd, similar to Route 1. After approximately 2 miles, take exit 16 toward New England Thruway. Merge onto Hutchinson River Pkwy N and stay on it for around 10 miles. Then take exit 25N for I-287 W towards White Plains/Tappan Zee Bridge. Continue on I-287 W for approximately 6 miles, take exit 2 toward Elmsford/Sawmill Pkwy, and follow State Route 119 into Elmsford.

Using the same gas price and vehicle fuel efficiency, the estimated one-way cost for this route would be:

Cost = (Distance ÷ Miles per Gallon) × Gas Price = (21 ÷ 25) × $2.85 = $2.74

Recommendation: The Best Route

After examining the various routes, considering both their costs and distances, it is evident that Route 1 via I-95 and I-287 is the most economical choice. With an estimated one-way cost of $2.17 and a distance of 19 miles, this route offers both convenience and affordability. Furthermore, with a travel time of approximately 30 minutes in moderate traffic, it provides a reasonable timeframe for reaching your destination.

Conclusion

In conclusion, the most cost-effective route when traveling from New Rochelle, New York, to Elmsford, New York, is Route 1 via I-95 and I-287. With an estimated one-way cost of $2.17 and a travel distance of 19 miles, this route ensures both fuel efficiency and affordability. Additionally, with a moderate traffic travel time of around 30 minutes, you can expect a smooth and timely journey. So, sit back, relax, and enjoy your drive through the scenic roads as you make your way from New Rochelle to Elmsford.