Driving Cost from Charlotte, North Carolina to Burtonsville, Maryland

A picture depicting a gas pump

The Cost of Driving From Charlotte, North Carolina to Burtonsville, Maryland

Planning a road trip from Charlotte, North Carolina to Burtonsville, Maryland? Before hopping into your car, it's important to calculate the cost of your journey. Gas prices, tolls, and the various routes available can all impact your budget. That's why we're here to help you make an informed decision. Read on to discover the cost of driving between these two destinations based on current gas prices.

Route 1: Taking I-85 and I-95 North

Distance: 377 miles

Taking the most direct route, you'll start your journey by driving north on I-85 and then connecting to I-95 towards Burtonsville, Maryland. This route covers a distance of 377 miles and takes approximately 6 hours and 16 minutes.

As for the cost, let's break it down:

  • Gas prices currently average around $2.69 per gallon.
  • Considering an average gas mileage of 30 miles per gallon, you will need around 13 gallons of gas for this trip.
    • 377 miles / 30 miles per gallon = approximately 12.6 gallons
    • Round up to 13 gallons for safety and unforeseen circumstances.
  • The total cost of gas would be:
    • 13 gallons * $2.69 per gallon = $34.97

Additionally, this route includes a few toll roads along the way. Be prepared to pay approximately $12 to $15 in toll charges, depending on the specific toll booths you encounter.

Route 2: Scenic Drive via the Blue Ridge Parkway

Distance: 480 miles

If you're in the mood for a scenic adventure, consider taking the picturesque Blue Ridge Parkway. This route adds some extra miles to your journey, covering a total distance of 480 miles. The estimated travel time for this route is around 8 hours.

Now, let's talk about the cost:

  • With gas prices averaging $2.69 per gallon, and considering that you will need approximately 16 gallons of gas for this trip, the cost of gas alone comes to around:
    • 480 miles / 30 miles per gallon = 16 gallons
    • 16 gallons * $2.69 per gallon = $43.04

As for toll charges, this route does not include any toll roads, saving you a few extra dollars.

Route 3: Quick and Convenient via I-77 and I-70

Distance: 416 miles

For those who prioritize a quick and convenient journey, taking I-77 and then connecting to I-70 is your best bet. This route spans a total distance of 416 miles and can be completed in approximately 6 hours and 45 minutes.

Here's a breakdown of the costs:

  • Gas prices at $2.69 per gallon would require you to purchase around 14 gallons of gas for this trip:
    • 416 miles / 30 miles per gallon = approximately 13.87 gallons
    • Round up to 14 gallons.
    • 14 gallons * $2.69 per gallon = $37.66

Similar to Route 2, this route does not include any toll roads, which means you can enjoy a straightforward journey without any extra costs.

Conclusion

When planning a road trip from Charlotte, North Carolina to Burtonsville, Maryland, it's essential to factor in the cost of your journey. After analyzing the different routes available, the costs are as follows:

  • Route 1 (I-85 and I-95): approximately $34.97 for gas and $12 to $15 in toll charges.
  • Route 2 (Blue Ridge Parkway): approximately $43.04 for gas, without any toll charges.
  • Route 3 (I-77 and I-70): approximately $37.66 for gas, without any toll charges.

Keep in mind that gas prices and toll charges may vary, so it's always a good idea to double-check and plan accordingly. Safe travels!