Driving Cost from Charleston, West Virginia to Flintstone, Maryland

A picture depicting a gas pump

The Cost of a Trip Between Charleston, WV and Flintstone, MD

Are you planning a road trip from Charleston, West Virginia, to Flintstone, Maryland? If you're looking for the cheapest route and the one that offers the most scenic views, you're in the right place. In this article, we'll discuss the different possible routes, the cost of each one, and our recommendation for the best route to take.

Route Options

Route 1: Via I-79 and I-68

This is the most direct route from Charleston to Flintstone. It covers a distance of 232 miles and takes approximately four hours to complete. To take this route, follow these instructions:

  1. Head east on I-64 E towards Beckley
  2. Merge onto I-77 N
  3. Take exit 101 for I-79 N towards Fairmont/Morgantown
  4. Keep right at the fork and follow signs for I-68 E/Cumberland/US-119 N/Morgantown and merge onto I-68 E
  5. Take exit 50 for Chestnut Ridge Rd
  6. Turn right onto Chestnut Ridge Rd
  7. Turn left onto Naves Cross Rd NE
  8. Turn right onto Flintstone Dr

The cost of taking this route is relatively low, as it only covers a distance of 232 miles. With the current gas price of $2.19 per gallon and an average fuel economy of 25 miles per gallon, the estimated cost of gas for this route is around $23.

Route 2: Via I-64 and I-68

This route covers a distance of 289 miles and takes approximately five hours to complete. To take this route, follow these instructions:

  1. Head east on I-64 E towards Charleston
  2. Take exit 46B for I-79 N towards Fairmont/Morgantown
  3. Merge onto I-79 N
  4. Keep right at the fork and follow signs for I-68 E/Cumberland/US-119 N/Morgantown and merge onto I-68 E
  5. Take exit 50 for Chestnut Ridge Rd
  6. Turn right onto Chestnut Ridge Rd
  7. Turn left onto Naves Cross Rd NE
  8. Turn right onto Flintstone Dr

The cost of taking this route is higher than Route 1, as it covers a longer distance of 289 miles. With the current gas price of $2.19 per gallon and an average fuel economy of 25 miles per gallon, the estimated cost of gas for this route is around $29.

Route 3: Via US-60 and I-64

This is the longest route from Charleston to Flintstone, covering a distance of 326 miles. It takes approximately six hours to complete. To take this route, follow these instructions:

  1. Head east on I-64 E towards Charleston
  2. Take exit 58A for US-60 E
  3. Turn left onto US-60 E
  4. Turn right onto Midland Trail and go straight until you reach the West Virginia Turnpike
  5. Take the West Virginia Turnpike N ramp on the left
  6. Merge onto WV-9 E
  7. Take exit 12-13 for I-70 W/I-81 S towards Hagerstown/Winchester
  8. Keep left at the fork and follow signs for I-70 W/Hagerstown and merge onto I-70 W
  9. Take exit 77 for MD-56 W towards Flintstone
  10. Turn left onto MD-560 and continue straight onto Flintstone Dr

The cost of taking this route is the highest, since it covers the longest distance of 326 miles. With the current gas price of $2.19 per gallon and an average fuel economy of 25 miles per gallon, the estimated cost of gas for this route is around $33.

Our Recommendation

Based on the routes discussed above, we recommend taking Route 1 via I-79 and I-68. This route is the most direct and covers the shortest distance, making it the most cost-effective.

While Route 3 offers a scenic drive, it takes longer to reach Flintstone and is the most expensive option. Route 2, on the other hand, covers a shorter distance than Route 3 but is still longer than the recommended route and costs more in gas.

Conclusion

In conclusion, if you're planning a road trip from Charleston, West Virginia, to Flintstone, Maryland, the most cost-effective route is via I-79 and I-68. With a total distance of 232 miles, the estimated cost of gas for this route is around $23. This route takes approximately four hours to complete and offers a good balance of time and cost-efficiency.