Driving Cost from Cedar Park, Texas to Vidor, Texas

A picture depicting a gas pump

The Cost of a Trip Between Cedar Park and Vidor, Texas

Driving from Cedar Park to Vidor is not as simple as it may seem. There are different routes to take, each with its own cost and distance. This article will examine the various routes, the cost of gas, and ultimately recommend the best option for your driving needs.

The Possible Routes

Route 1: I-10 E

The first and most direct route is taking I-10 E from Cedar Park to Vidor. This route has a total distance of approximately 250 miles and will take around four hours (without stops), depending on traffic.

Route 2: Hwy 71 and Hwy 77

Another route to consider is taking Hwy 71 East to Gonzales and then joining Hwy 183 South until it intersects with Hwy 77. From there, it is a straight shot to Vidor. This route has a total distance of about 300 miles and will take a little over five hours (without stops), depending on traffic.

Route 3: Hwy 21 and Hwy 190

A third option is to take Hwy 21 East to Bryan and then join Hwy 90. From there, drivers will reach Hwy 190, which goes directly to Vidor. The total distance on this route is about 350 miles and will take around six hours (without stops), depending on traffic.

The Cost of Gas

The cost of gas is a crucial factor when deciding on a route. As of the time of writing this article, the average gas price in Texas is $2.80 per gallon. To calculate the cost of gas, we will assume an average fuel efficiency of 25 miles per gallon.

Here is the estimated cost of gas for each of the possible routes:

  • Route 1 (I-10 E): 250 miles ÷ 25 miles per gallon × $2.80 per gallon = $28.00
  • Route 2 (Hwy 71 and Hwy 77): 300 miles ÷ 25 miles per gallon × $2.80 per gallon = $33.60
  • Route 3 (Hwy 21 and Hwy 190): 350 miles ÷ 25 miles per gallon × $2.80 per gallon = $39.20

As we can see, Route 1 is the cheapest option, with a gas cost of $28.00. Route 2 and Route 3 are more expensive, costing $33.60 and $39.20, respectively.

Recommendation

Based on the distance and cost of gas, Route 1 (I-10 E) is the best option for driving from Cedar Park to Vidor. Although it is shorter, it will take approximately four hours. Drivers should plan to take breaks and stretch their legs during the trip to prevent fatigue and ensure safety on the road.

Conclusion

Driving from Cedar Park to Vidor can be a long and tedious journey, but choosing the right route can make all the difference. With its lower gas cost and shorter distance, Route 1 (I-10 E) is the recommended option. Be sure to take necessary precautions such as taking breaks, having a properly maintained vehicle, and planning ahead for any unforeseen circumstances. Have a safe and enjoyable trip!