meetways logo
  • Home
  • About Us
  • Meet Business
  • Mobile
  • Contact Us

Driving Cost from Burtonsville, Maryland to Elkridge, Maryland

  • Halfway Point
  • Points of Interest
  • Travel Time
  • Travel Cost
A picture depicting a gas pump

The Cost of Driving from Burtonsville, MD to Elkridge, MD

Are you planning a road trip from Burtonsville, MD to Elkridge, MD? Before you start packing up your car, it's important to consider the cost of gas and tolls for the trip. In this blog post, we'll break down the cost of driving based on current gas prices and highlight different routes you can take.

Route 1: Via I-95 S

The most common route to get from Burtonsville to Elkridge is via I-95 S. This route is approximately 18 miles and takes around 25 minutes without traffic. During peak hours, however, you could be looking at up to an hour drive time.

To get to Elkridge via I-95 S, you will need to factor in tolls. The Fort McHenry Tunnel and Francis Scott Key Bridge tolls are $4.00 each way. You should budget approximately $8.00 for round trip tolls.

Gas prices in Maryland are currently averaging $2.79 per gallon. For this route, you can expect to use about 1.5 gallons of gas each way. At $2.79 per gallon, your total gas cost will come out to be approximately $8.37.

Therefore, the total cost of this trip via I-95 S is approximately $16.37 (round trip).

Route 2: Via US-29 S and MD-100 E

Another route you could consider taking from Burtonsville to Elkridge is via US-29 S and MD-100 E. This route is longer at approximately 23 miles, but it may be a faster route depending on traffic conditions.

Without traffic, this route takes around 30 minutes. During peak hours, you could be looking at closer to 45 minutes to an hour of drive time.

There are no tolls on this route, so you can bypass that cost. You will still need to factor in gas expenses. Using the same gas price and mileage calculations as with Route 1, you can expect to spend approximately $11.16 on gas for this route.

Therefore, the total cost of this trip via US-29 S and MD-100 E is approximately $22.32 (round trip).

Route 3: Via MD-198 W and US-1 S

A third route option to get from Burtonsville to Elkridge is via MD-198 W and US-1 S. This route is approximately 20 miles and would take around 40 minutes of travel time without traffic.

There are no tolls on this route, and using the same gas price and mileage calculations as with Route 1 and 2, you can expect to spend approximately $9.44 on gas for this route.

Therefore, the total cost of this trip via MD-198 W and US-1 S is approximately $18.88 (round trip).

Conclusion

When planning a road trip, it's important to take into consideration the cost of gas and tolls for each route. As outlined in this blog post, the total cost of driving from Burtonsville, MD to Elkridge, MD will depend on the route you take. With gas prices currently averaging $2.79 per gallon in Maryland, you can expect to spend approximately $16.37 to $22.32 (round trip) on gas and tolls for the three different routes suggested. Safe travels!

56,575,914 Halfway points found so far

;

Making finding a middle point between two address easier than ever.

  • About Us
  • List of Countries
  • Our Team
  • Press
  • Meet Business
  • MeetWays Mobile
  • Contact Us
  • Frequently Asked Questions
  • Meeting Points
  • Popular Searches
  • Site Map
  • Privacy Policy
  • Terms of Service

meetways.com © 2008 - 2025 Arandola, LLC