The Cost of Driving From Bristol Township to Marple Township

Are you planning a road trip from Bristol Township to Marple Township in Pennsylvania? If so, you may be wondering about the cost of driving. There are several routes you can take, each with its own distance, time, and cost. Let's break it down.

Route 1: I-95 South and I-476 North

This is the most direct route, but it also has tolls. The distance is 72.1 miles and it takes about 1 hour and 20 minutes to get to Marple Township. The tolls for this route are $6.10 for the Pennsylvania Turnpike and $1.60 for I-476, making a total of $7.70. Add in the cost of gas, which is currently about $3.00 per gallon, and you're looking at a total cost of around $22.30 for this route.

Route 2: U.S. 1 South and PA-352 South

This route is a bit longer but avoids tolls. The distance is 75.8 miles and it takes about 1 hour and 30 minutes to get to Marple Township. Since there are no tolls, the only cost is for gas, which comes out to around $21.80 based on current gas prices.

Route 3: PA-413 South and PA-63 West

This route is the longest but goes through some scenic areas. The distance is 79.3 miles and it takes about 1 hour and 40 minutes to get to Marple Township. There are no tolls on this route, so the only cost is for gas, which is about $23.00 based on current gas prices.

Final Thoughts

When planning a road trip, it's important to consider the distance, time, and cost of each possible route. While the toll route may be the most direct, it may not be the most cost-effective option. On the other hand, taking longer routes may save you money on tolls, but you should also consider if you want to spend extra time driving. Ultimately, the decision is up to you. Safe travels!