The Cost of a Trip from Bristol Township, Pennsylvania to Georgetown, Delaware

Are you planning a trip from Bristol Township, Pennsylvania to Georgetown, Delaware? If so, you may be wondering about the cost of fuel and the most economical route. In this article, we will explore the different possible routes, highlight the cost and distance of each one, and recommend the best route based on current gas prices.

Route Options and Costs

Route 1: I-95 and DE-1

The most direct route from Bristol Township to Georgetown is to take I-95 South and then switch to DE-1 South. This route spans a distance of approximately 120 miles and takes around 2 hours to complete, depending on traffic conditions. The majority of the journey is on highways, with fewer stops and potential delays.

To calculate the fuel cost for this route, we need to consider the average fuel consumption of your vehicle. Let's assume your car has a consumption rate of 25 miles per gallon (MPG) and that the current average gas price in Pennsylvania is $2.80 per gallon. With these figures, we can determine the cost as follows:

Fuel Consumption (Gallons) = Distance (Miles) / MPG Fuel Cost ($) = Fuel Consumption (Gallons) * Gas Price

For Route 1, the fuel consumption calculations are as follows:

Fuel Consumption (Gallons) = 120 miles / 25 MPG = 4.8 gallons Fuel Cost ($) = 4.8 gallons * $2.80/gallon = $13.44

Therefore, the estimated fuel cost for Route 1 is approximately $13.44.

Route 2: US-13

If you prefer a more scenic route with the possibility to visit some charming small towns along the way, you may consider taking US-13 South. This route covers a longer distance of approximately 135 miles and can take about 3 hours due to slower speed limits and possible traffic in smaller towns.

Using the same fuel consumption rates and gas price, the fuel cost for Route 2 can be calculated as follows:

Fuel Consumption (Gallons) = 135 miles / 25 MPG = 5.4 gallons Fuel Cost ($) = 5.4 gallons * $2.80/gallon = $15.12

The estimated fuel cost for Route 2 is approximately $15.12.

Route 3: I-295 and DE-1

Another alternative is to take I-295 South and later switch to DE-1 South, which offers a combination of highways and scenic areas. This route spans a distance of approximately 125 miles and takes around 2 hours and 30 minutes, depending on traffic conditions.

The fuel cost can be calculated as follows:

Fuel Consumption (Gallons) = 125 miles / 25 MPG = 5 gallons Fuel Cost ($) = 5 gallons * $2.80/gallon = $14.00

The estimated fuel cost for Route 3 is approximately $14.00.

Best Route Recommendation

Considering the cost and distance, as well as the driving time, Route 1, which involves taking I-95 and then DE-1, appears to be the most economical and time-efficient option. Not only does it have the shortest distance and travel time, but it also keeps you mainly on highways, reducing the likelihood of encountering delays or traffic jams.

While Route 2, which follows US-13, offers a more scenic drive, it takes longer and results in slightly higher fuel costs. Route 3, including I-295 and DE-1, may have some scenic stretches but is somewhat longer in terms of distance and driving time compared to Route 1.

Conclusion

In conclusion, if you are planning a trip from Bristol Township, Pennsylvania to Georgetown, Delaware, considering the cost of fuel and the most efficient route is essential. After analyzing the different options, Route 1, which involves taking I-95 South and then switching to DE-1 South, appears to be the best route. With an estimated fuel cost of approximately $13.44 and a driving time of about 2 hours, this route offers the shortest distance, quickest travel time, and is primarily on highways, ensuring a smooth and efficient journey.