The Cost of a Trip Between Brick Township, NJ and Village of Tarrytown, NY
If you are planning a trip between Brick Township, New Jersey, and the Village of Tarrytown, New York, you need to be aware of the different routes that can be taken, as the cost of the trip can vary depending on the route you choose. In this article, we will explore the different routes you can take, the distance and cost of each one, and recommend the best route based on your preferences and budget.
Different Possible Routes
To get from Brick Township, NJ, to the Village of Tarrytown, NY, there are several routes you can take. The most common routes are:
Route 1: Via Garden State Parkway and Tappan Zee Bridge
This is the most direct route, but it also has tolls involved. You will take Garden State Parkway northbound from Brick Township to the New York State Thruway (Interstate 87), then head south on the Thruway until you reach the Tappan Zee Bridge. From there, follow signs to the Tappan Zee Expressway (Interstate 87/287) until you reach the exit for the Saw Mill River Parkway, which will take you directly to the Village of Tarrytown.
Route 2: Via Garden State Parkway and George Washington Bridge
This route is longer than Route 1, but it is also a more scenic drive. You will take the Garden State Parkway northbound from Brick Township to the George Washington Bridge, then cross the bridge into Manhattan and head north on the Henry Hudson Parkway until you reach the Saw Mill River Parkway, which will take you directly to the Village of Tarrytown.
Route 3: Via New Jersey Turnpike and Tappan Zee Bridge
This route is the longest of the three, but it also has the least amount of tolls involved. You will take the New Jersey Turnpike northbound from Brick Township to Exit 14, then transfer to the Garden State Parkway northbound until you reach the New York State Thruway (Interstate 87). Take the Thruway southbound until you reach the Tappan Zee Bridge, then follow signs to the Tappan Zee Expressway (Interstate 87/287) until you reach the exit for the Saw Mill River Parkway, which will take you directly to the Village of Tarrytown.
Distance and Cost Comparison
The distance and cost of each route can vary depending on the tolls involved and the amount of traffic on the roads. To help you decide which route is best for your needs, we have broken down the distance and cost of each route below:
| Route | Distance (in miles) | Cost (in tolls) |
|---|---|---|
| Route 1 | 84.2 | $17.45 |
| Route 2 | 98.8 | $16.75 |
| Route 3 | 105.8 | $5.70 |
Based on the table above, it is clear that Route 3 is the longest of the three, but it is also the cheapest as it has the least amount of tolls involved. Route 1 is the most direct route, but it is also the most expensive due to the number of tolls involved. Route 2 is a compromise between the two, as it is longer than Route 1 but shorter than Route 3, and it has a moderate amount of tolls involved.
Recommended Route
Based on the distance and cost comparison, we would recommend taking Route 3 as the best route for your trip. It may be the longest of the three routes, but it is also the cheapest, with only $5.70 in tolls. Furthermore, Route 3 avoids the congested George Washington Bridge, which can save you time and stress during your trip.
Conclusion
In conclusion, the cost of a trip between Brick Township, NJ, and the Village of Tarrytown, NY, can vary depending on the route you choose. The most direct route, Route 1, is also the most expensive due to the number of tolls involved. Route 2 is a more scenic drive but has a higher cost than Route 3, which is the longest of the three routes but also the cheapest. Based on our recommendation, we suggest taking Route 3 for your trip, as it has the least amount of tolls involved and avoids the congested George Washington Bridge. Overall, the trip between Brick Township and the Village of Tarrytown can take between 1.5 to 2 hours depending on traffic conditions and the route taken, but with careful planning, you can enjoy a cost-effective and stress-free journey.