The Cost of a Trip between Brick Township, NJ and Milwaukee, WI: A Guide Based on Current Gas Prices

When planning a trip from Brick Township, NJ to Milwaukee, WI, one of the biggest factors to consider is the cost. Gas prices are constantly fluctuating, and different routes can affect the overall expense. Fortunately, with a little research, you can plan a cost-effective trip without sacrificing comfort or convenience.

Route Options and Costs

To begin planning your trip, it's essential to consider the route you'll take. The distance between Brick Township, NJ, and Milwaukee, WI, is about 830 miles, so a direct route would require approximately 12 hours of driving. However, there are several options to consider in terms of route and cost.

Route 1 - Via I-80 and I-90

One option for traveling from Brick Township to Milwaukee is to take I-80 and I-90. This route will take you through Pennsylvania, Ohio, and Indiana before you reach Wisconsin. While this route will be the most direct option, it may not necessarily be the cheapest given the tolls and distance.

The cost of gas will vary based on where you stop to refill, but on average, you can expect to pay about $2.50 per gallon in New Jersey and $3.00 per gallon in the Midwest.

The distance of the trip via this route is approximately 870 miles, and if you were to get 25 miles per gallon with a vehicle like the Honda Civic, which gets an average of 32 mpg on the highway, you'd need to fill roughly 35 gallons of gas for the trip. This means the total cost of gas for this route would be approximately $106.

Route 2 - Via I-76 and I-80

Another option for traveling from Brick Township to Milwaukee is to take the I-76 and I-80 route. This route is slightly longer, as it takes you through Pennsylvania, Ohio, and then onto I-74 in Indiana. Next, you'll need to hop on I-80 again until you reach Wisconsin.

The cost of gas here is going to be slightly higher, as Pennsylvania charges tolls on I-76, and the distance is further. You can expect to pay about $2.50 per gallon in New Jersey and then about $3.00 per gallon in Ohio and Indiana before reaching Wisconsin.

The distance of the trip via this route is approximately 910 miles, and if you were to get 25 miles per gallon with a vehicle like the Honda Civic, you'd need to fill approximately 36.5 gallons of gas for the trip. This means the total cost of gas for this route would be approximately $111.

Route 3 - Via I-95 and I-90

If you prefer a route that takes you along the East Coast, then you should consider the I-95 and I-90 route from Brick Township to Milwaukee. This route will take you through New York, Connecticut, Massachusetts, and then onto I-90 in Albany before reaching the Midwest.

The cost of gas along this route will be similar to Route 1 as you'll mainly be traveling through the Northeast before reaching the Midwest. You'll pay about $2.50 per gallon in New Jersey, and then it will increase as you travel North on I-95, with Connecticut averaging $2.80 per gallon.

The distance of this trip is approximately 1,013 miles, and with a car like the Honda Civic, which gets 32 miles per gallon on the highway, you'll need to fill approximately 32 gallons of gas for the journey. This makes the total cost of gas about $101.

Which is the Cheapest and Most Efficient Route?

Based on the costs and distance of each route, Route 3 is the cheapest and most efficient way to travel from Brick Township to Milwaukee. The I-95 and I-90 route may be the longest, but it offers the lowest cost of gas and is still only about 200 miles longer than Route 1.

However, it's important to note that your final cost may vary based on other factors, such as hotel stays, food expenses, and gas prices at the time of your trip. Therefore, it's recommended that you carefully plan your route well in advance of your trip to account for any unexpected issues.

Conclusion

When planning a trip between Brick Township, NJ, and Milwaukee, WI, the cost of gas is an essential consideration. While there are several routes to choose from, calculating the distance and cost of each route will help you choose the most cost-effective option. Ultimately, the I-95 and I-90 route is the most efficient and cheapest route, with a total cost of approximately $101 based on current gas prices. Happy travels!