The Cost of Driving From Bradbury to Riverside Based on Current Gas Prices

Are you planning a road trip from Bradbury, California to Riverside, California? It's always good to know how much you'll spend on gas and tolls. In this article, we'll analyze different routes, the distance between them, the time it takes, and the cost of each route based on current gas prices.

Route 1: Using the I-210 W and I-215 S

The first option is to take the I-210 W and then switch to the I-215 S. This route is about 36 miles long and takes around 45 minutes to drive, depending on traffic. You won't encounter any tolls on this route.

To calculate the cost of gas for this route, we used GasBuddy's estimated fuel prices, which are around $4.18 per gallon. If your car gets an average of 25 miles per gallon, you'll need about 1.4 gallons of gas for this route. That means that you'll spend about $5.85 on gas for this route.

Route 2: Using the CA-57 S and CA-91 W

The second option is to take the CA-57 S and then switch to the CA-91 W. This route is about 35 miles long and takes about 50 minutes to drive, depending on traffic.

To calculate the cost of gas for this route, we used GasBuddy's estimated fuel prices, which are around $4.18 per gallon. If your car gets an average of 25 miles per gallon, you'll need about 1.4 gallons of gas for this route. That means that you'll spend about $5.85 on gas for this route.

Additionally, you'll need to pay a toll of $7.00 for the express lane on the CA-91 W. That brings the total cost of this route to $12.85.

Route 3: Using the I-210 W and I-10 E

The third option is to take the I-210 W and then switch to the I-10 E. This route is about 40 miles long and takes about an hour to drive, depending on traffic. You won't encounter any tolls on this route.

To calculate the cost of gas for this route, we used GasBuddy's estimated fuel prices, which are around $4.18 per gallon. If your car gets an average of 25 miles per gallon, you'll need about 1.6 gallons of gas for this route. That means that you'll spend about $6.71 on gas for this route.

Conclusion

In summary, the cost of driving from Bradbury, California to Riverside, California varies depending on the route you take. If you take the first or third route, you'll spend around $5.85 on gas. If you opt for the second route, you'll spend $12.85 on gas and tolls.

Make sure to account for gas and tolls when planning your road trip. Safe travels!