The Cost of a Trip from Bowling Green, KY to Philadelphia, PA based on Current Gas Prices

Are you planning a road trip from Bowling Green, Kentucky to Philadelphia, Pennsylvania? If so, you might be wondering about the cost of the trip. Gas prices can vary greatly depending on where you are and when you travel. In this article, we’ll break down the different possible routes and highlight the cost and distance of each one, so you can make an informed decision about the best route to take.

Possible Routes

There are a few different routes you can take from Bowling Green to Philadelphia, each with its own advantages and disadvantages. Here are three possibilities:

Route 1: I-65 N and I-76 E

This is the most direct route, but it involves traveling through some major cities, including Indianapolis, Columbus, and Pittsburgh. The distance is about 665 miles, and it takes about 10 hours to drive without stops.

Route 2: I-65 N, I-70 E, and I-76 E

This route adds about 70 miles to the trip, but it avoids some of the major cities on the first route. Instead, you’ll be passing through Dayton, Ohio and Wheeling, West Virginia. The total distance is about 735 miles, and it takes about 11 hours to drive without stops.

Route 3: I-65 N and I-80 E

This route takes you through Chicago and Cleveland, but it avoids some of the larger cities on the other routes. It is also about 775 miles long and takes about 12 hours to drive without stops.

Gas Prices

Of course, the cost of the trip will depend on gas prices along the way. According to GasBuddy.com, as of August 2021, the average gas price in Bowling Green, Kentucky is $2.84 per gallon. In Philadelphia, Pennsylvania, the average is $3.23 per gallon. Here is an estimate of the total cost of gas for each route, based on a car with a 15-gallon tank and an average fuel economy of 25 miles per gallon:

Route 1: I-65 N and I-76 E

The distance is about 665 miles, so with an average of 25 miles per gallon, you would need about 26.6 gallons of gas for the trip. At $2.84 per gallon, that’s a total of $75.34 for gas. When you get to Philadelphia, you’ll need to fill up again for the trip back, which will cost an additional $81.45 based on Philadelphia’s gas prices.

Route 2: I-65 N, I-70 E, and I-76 E

The distance is about 735 miles, so you would need about 29.4 gallons of gas for the trip. At $2.84 per gallon, that’s a total of $83.50 for gas. When you get to Philadelphia, you’ll need to fill up again for the trip back, which will cost an additional $90.54 based on Philadelphia’s gas prices.

Route 3: I-65 N and I-80 E

The distance is about 775 miles, so you’ll need about 31 gallons of gas for the trip. At $2.84 per gallon, that’s a total of $88.44 for gas. When you get to Philadelphia, you’ll need to fill up again for the trip back, which will cost an additional $95.91 based on Philadelphia’s gas prices.

Recommended Route

Based on gas prices and total cost, Route 1: I-65 N and I-76 E is the most cost-effective option. It’s also the most direct route, so you’ll get to your destination faster. However, keep in mind that this route does involve more traffic through major cities, so there may be delays and higher stress levels.

If you prefer to avoid traffic and large cities, Route 2: I-65 N, I-70 E, and I-76 E may be a better option, even though it is slightly more expensive.

Conclusion

In conclusion, the cost of a road trip from Bowling Green, Kentucky to Philadelphia, Pennsylvania varies depending on the route you take and gas prices along the way. Route 1: I-65 N and I-76 E is the most cost-effective option, while Route 2: I-65 N, I-70 E, and I-76 E may be a better choice if you prefer to avoid traffic. Regardless of the route you take, be sure to factor in the cost of gas and any necessary pit stops along the way. Safe travels!