The Cost of a Trip between Borough of Wyre and Borough of Rossendale: Exploring the Best Routes and Current Gas Prices
Introduction
Planning a trip between the Borough of Wyre and the Borough of Rossendale in England? One important factor to consider is the cost of the trip, especially with the fluctuating gas prices. In this article, we will delve into the different possible routes between these two locations, highlighting the distance and cost associated with each one. By considering both factors, we will then recommend the best route to take. So, fasten your seatbelts and let's get started!
Route 1: Via M6
The first and perhaps the most direct route between Wyre and Rossendale is via the M6 motorway. Starting from Wyre, you would head south and connect to the M6 at Junction 32. From there, it's a straight drive until you reach Junction 29, where you will exit onto the M65 towards Rossendale.
Distance and Cost
The distance between Wyre and Rossendale via the M6 and M65 is approximately 40 miles. The current gas prices in the area average around £1.25 per liter. For the average car traveling around 30 miles per gallon, the cost of this route would be:
Cost = (Distance / MPG) * Price per liter
Plugging in the values for this route:
Cost = (40 miles / 30 MPG) * £1.25 per liter
Cost = £1.67
The estimated cost for this route would be around £1.67.
Route 2: Via A6
An alternative route between Wyre and Rossendale is to take the A6 road. This route is more scenic and will take you through the beautiful countryside. From Wyre, you would head southeast on the A585 until you reach the A6. Continue south on the A6 until you reach Rossendale.
Distance and Cost
The distance between Wyre and Rossendale via the A6 is approximately 42 miles. Applying the same gas prices and car efficiency as before, the cost for this route can be calculated as:
Cost = (Distance / MPG) * Price per liter
Cost = (42 miles / 30 MPG) * £1.25 per liter
Cost = £1.75
Thus, the estimated cost for this route is £1.75.
Route 3: Via M55 and M65
For those looking for a slightly longer but potentially faster route, the third option involves taking the M55 and M65 motorways. Starting from Wyre, you would head south and connect to the M55 at Junction 3. Follow the M55 until you reach Junction 1, then exit onto the A6 towards Broughton. Continue on the A6 until you reach the M55 again, this time at Junction 31. Take the M55 west until you reach Junction 1, then merge onto the M6 towards Birmingham. Finally, at Junction 29, exit onto the M65 towards Rossendale.
Distance and Cost
The distance between Wyre and Rossendale via the M55 and M65 is approximately 50 miles. Applying the same calculations as before, the estimated cost for this route would be:
Cost = (Distance / MPG) * Price per liter
Cost = (50 miles / 30 MPG) * £1.25 per liter
Cost = £2.08
Therefore, the estimated cost for this route is around £2.08.
Route Recommendation
Based on the distance and cost analysis, the most cost-effective route between Wyre and Rossendale is Route 1: Via M6. With a distance of only 40 miles and an estimated cost of £1.67, it is not only the shortest but also the cheapest option. However, keep in mind that this route might be subject to heavy traffic during peak hours, so it's essential to plan your journey accordingly.
Conclusion
In conclusion, if you're planning a trip between the Borough of Wyre and the Borough of Rossendale in England, there are several routes to consider. To minimize both distance and cost, Route 1 via the M6 motorway is recommended, with an estimated cost of £1.67. However, if you prefer a more scenic drive, you might opt for Route 2 via the A6 road, which has a slightly longer distance and a cost of approximately £1.75. Lastly, Route 3 through the M55 and M65 motorways offers a potential faster option, but with a cost of around £2.08 for the additional distance traveled.
Choose the route that suits your preferences and enjoy your trip from Wyre to Rossendale!
_Please note that the gas prices mentioned in this article are based on current average prices at the time of writing and may be subject to change. The MPG (miles per gallon) used in the calculations is an average efficiency value for most cars, and actual mileage may vary depending on the vehicle and driving conditions.