The Cost of Driving From Borough of Swale to Ashford Based on Current Gas Prices

If you're planning a trip from the Borough of Swale in England to Ashford, you're in for a treat! Whether you're heading there for a weekend getaway or for a business meeting, driving gives you the freedom to explore at your own pace. In this blog post, we'll break down the different routes, their distances, estimated travel times, and of course, the cost based on current gas prices. So, let's hit the road!

Route 1: A2 and M2 (Approximately 38 miles)

This is perhaps the most straightforward route to get from the Borough of Swale to Ashford, with an estimated travel time of around 40 minutes. Start your journey by heading west on the A2 and then join the M2. From there, take the M20 and continue until you reach Ashford. The distance is approximately 38 miles.

The cost for this route, including petrol costs, would depend on the current price of gas. As of writing this post, the average gas price is around £1.30 per liter. Assuming your car has an average fuel efficiency of 10 liters/100 km, and considering the distance of approximately 38 miles, the estimated cost for this route would be around £15.50.

Route 2: A251 and M20 (Approximately 29 miles)

For those looking for a slightly shorter route, you might consider taking the A251 and then joining the M20 towards Ashford. This route cuts through some beautiful countryside and offers an estimated travel time of around 35 minutes. The distance for this route is approximately 29 miles.

Calculating the cost for this route follows the same assumptions as the previous route. With current gas prices, the estimated cost would be around £11.80.

Route 3: A249 and M20 (Approximately 38 miles)

Another option to reach Ashford from the Borough of Swale is by taking the A249 and joining the M20. This route offers similar travel times and distances as Route 1, but can be a good alternative depending on road conditions or personal preference. The estimated travel time is around 45 minutes, covering approximately 38 miles.

The total cost for this route would be calculated similarly to Route 1 and is estimated to be around £15.50.

Route 4: A2 and A20 (Approximately 41 miles)

If you're looking to take a more scenic route, consider taking the A2 and then joining the A20 towards Ashford. This route might take a bit longer than the others, with an estimated travel time of around 50 minutes. The distance covered for this route is approximately 41 miles.

The cost for this route, taking into account the current gas prices, would be around £16.80.

*Please note that the estimated costs mentioned above are subject to change, and it's always a good idea to check for real-time fuel prices before embarking on your journey.

Whether you choose the most direct route or opt for a picturesque drive, the cost of driving from the Borough of Swale to Ashford will largely depend on petrol prices and the efficiency of your vehicle. So, fill up your tank, adjust your mirrors, and get ready to explore the beautiful countryside as you make your way to Ashford!