The Cost of a Trip between Bloomingdale, NJ and Bayport, NY Based on Current Gas Prices

Traveling between Bloomingdale, NJ, and Bayport, NY, can be an exciting, but also costly experience depending on the route taken. Before embarking on the trip, it's essential to understand the different routes, distance, and cost involved. This article breaks down the different possible routes and highlights the cost and distance of each one, ultimately recommending the best and most cost-effective option.

Route 1: NJ-17 and I-495 E

One of the most common routes from Bloomingdale, NJ, to Bayport, NY, is taking NJ-17 and I-495 E. This route covers approximately 102 miles and takes about an hour and forty-five minutes, depending on traffic.

The total cost of this trip depends on several factors, including fuel efficiency, gas prices, and vehicle type. Assuming an average of 20 miles per gallon and $3.00 per gallon of gas, the cost one way would be approximately $15.30.

One of the downsides of this route is that it passes through the George Washington Bridge, which frequently experiences heavy traffic. Additionally, roadworks and accidents often slow down traffic on this route, extending travel time and increasing fuel consumption.

Route 2: I-80 E and I-95 N

Another possible route from Bloomingdale, NJ, to Bayport, NY, is taking I-80 E and I-95 N. This route covers approximately 133 miles and takes about two hours and ten minutes, depending on traffic.

The total cost of this trip depends on gas prices, fuel efficiency, and vehicle type. Assuming an average of 20 miles per gallon and $3.00 per gallon of gas, the cost one way would be approximately $19.95.

One of the benefits of this route is that it avoids passing through the George Washington Bridge but includes toll roads along the way. The New Jersey and New York Turnpike costs $13.85 each so this factor should be considered before selecting this route to keep in mind.

Route 3: NJ-17 and I-278 E

Another possible route from Bloomingdale, NJ, to Bayport, NY, is taking NJ-17 and I-278 E. This route covers approximately 97 miles and takes about two hours, depending on traffic.

The total cost of this trip hugely depends on the gas prices, fuel efficiency, and vehicle type. Assuming 20 miles per gallon and $3.00 per gallon of gas, the cost one way would be approximately $14.55.

The Brooklyn-Queens Expressway section of the I-278 route is notorious for traffic jams, especially during rush hour and weekends. Consider the price of tolls before choosing this route, as it crosses the Verrazano-Narrows Bridge, costing $19 each way, and the Brooklyn Battery Tunnel, for $9.50 each way.

After considering the different options, the best route based on cost-efficiency would be taking NJ-17 and I-278 E. The distance is shorter, and the cost of gas is lower, and the tolls apply only to two bridges.

However, if traffic is a significant concern, taking NJ-17 and I-495 E could be the better option as it avoids sections that experience traffic jags during peak hours.

Conclusion

In summary, traveling between Bloomingdale, NJ, and Bayport, NY, can be a costly affair. The cost of the trip is highly variable, depending on the route taken, fuel economy, and gas prices. While toll roads increase the overall cost, they do offer convenience and, in some cases, a faster route.

From our analysis, the most efficient and cost-effective route is taking NJ-17 and I-278 E. This is a shorter distance and the cost of gas is lower compared to the other options as well. It is always good to consider traffic and road conditions before embarking on any trip.

After setting a budget and making a deep study of the different possibilities, traveling from Bloomingdale, NJ, to Bayport, NY, can be an enjoyable and exciting experience. With proper planning and considering all aspects, you can travel this distance without a hitch.