Driving Cost from Blairstown, New Jersey to Hamden, Connecticut

A picture depicting a gas pump

The Cost of a Trip between Blairstown, NJ and Hamden, CT Based on Current Gas Prices

If you're planning a trip between Blairstown, NJ and Hamden, CT, there are several routes you could take. Each route varies in distance, driving time, and cost. This article will break down the different possible routes and highlight the cost and distance of each one. We'll then recommend the best route based on current gas prices.

Route 1: via I-287 N and I-95 N

This route is the shortest and most direct route, however, it also has the most tolls. Starting in Blairstown, NJ, you'll take I-80 E towards New York City. From there, you'll take I-287 N towards Rye, NY. Then, you'll take I-95 N towards New Haven, CT, and finally, you'll take CT-15 N to Hamden, CT. The total distance of this route is approximately 198 miles, and it takes about 3 hours and 20 minutes to drive.

Tolls on this route can be quite expensive. Here's a breakdown of the tolls you can expect to pay:

  • Delaware Water Gap Toll Bridge: $1.25
  • George Washington Bridge Toll: $16.00 (westbound only)
  • New York State Thruway Toll: $3.00
  • New England Thruway Toll: $5.50
  • NYS Thruway: $1.00
  • Hampton Toll: $2.75 (southbound only)

So, the total cost of tolls on this route alone is $29.50. When you add in the cost of gas, which is around $2.87 per gallon, and assuming your car gets 30 miles per gallon, you're looking at a total cost of around $32.63 for this route.

Route 2: via I-78 E and I-95 N

This route is slightly longer than Route 1 but has fewer tolls. Starting in Blairstown, NJ, you'll take NJ-94 E towards Columbia, NJ. From there, you'll get on I-78 E towards New York City. Next, you'll take the Holland Tunnel into Manhattan and get on I-95 N towards New Haven, CT. Finally, you'll take CT-15 N to Hamden, CT. The total distance of this route is approximately 217 miles, and it takes about 3 hours and 40 minutes to drive.

The only toll you'll encounter on this route is the Holland Tunnel toll, which is $13.00 westbound only. So, the total cost of tolls on this route is $13.00. When you add in the cost of gas, which is around $2.87 per gallon, and assuming your car gets 30 miles per gallon, you're looking at a total cost of around $36.89 for this route.

Route 3: via I-287 N and I-84 E

This route is the longest of the three but has the fewest tolls. Starting in Blairstown, NJ, you'll take I-80 E towards New York City. From there, you'll take I-287 N towards Mahwah, NJ. Next, you'll get on I-87 N towards Newburgh, NY, and finally, you'll take I-84 E towards Hartford, CT. From there, you'll take CT-15 S to Hamden, CT. The total distance of this route is approximately 240 miles, and it takes about 4 hours to drive.

The only tolls you'll encounter on this route are the New York State Thruway tolls, which cost $3.00 each. So, the total cost of tolls on this route is $6.00. When you add in the cost of gas, which is around $2.87 per gallon, and assuming your car gets 30 miles per gallon, you're looking at a total cost of around $40.80 for this route.

Based on current gas prices and the total cost of tolls, we recommend Route 2 as the best route between Blairstown, NJ and Hamden, CT. While it may be slightly longer in distance, it still takes about the same amount of time to drive as Route 1 and costs a few dollars less in tolls. This route also takes you through Manhattan, which can be a unique experience for those who have never driven through the city before.

Conclusion

No matter which route you choose, the cost of a trip between Blairstown, NJ and Hamden, CT will vary based on tolls and gas prices. However, by choosing the right route, you can save a few dollars and potentially see some exciting sights along the way. Ultimately, it's up to you to decide which route is best for your needs and budget. Safe travels!