Driving Cost from Berwick, Pennsylvania to Benton, Pennsylvania

A picture depicting a gas pump

The Cost of a Trip Between Berwick, Pennsylvania and Benton, Pennsylvania

Introduction

Planning a trip from Berwick, Pennsylvania to Benton, Pennsylvania? Aside from considering the exciting destinations and activities that await you in Benton, it's important to also factor in the cost of your journey. With fluctuating gas prices and multiple route options available, it can be challenging to determine the most economical way to travel. In this article, we will explore the different possible routes between these two towns, highlighting the costs and distances associated with each. By the end, you will have a clear understanding of the most budget-friendly route for your trip.

Route Options

Route 1: Via PA-93 S

The most direct route between Berwick and Benton is via PA-93 S. This route spans approximately 13 miles and can be completed in around 20 minutes, depending on traffic. To calculate the cost of this trip, we'll consider the current average gas price in the area. As of February 2022, the average cost of regular unleaded gasoline in Pennsylvania is $3.20 per gallon.

Given that a typical car can achieve an average of 25 miles per gallon, we can calculate the required amount of gas by dividing the distance of 13 miles by the car's mileage of 25 mpg. This results in 0.52 gallons of gas consumed for a one-way trip.

The total cost of this route can therefore be calculated as follows:

Cost = Gas Price per Gallon * Gallons Consumed
Cost = $3.20 * 0.52
Cost ≈ $1.66 (one-way)

Considering the round trip, the total cost for this route will be approximately $3.32.

Route 2: Via PA-239 S and PA-487 S

Another option for traveling between Berwick and Benton is to take a slightly longer, but potentially more scenic, route via PA-239 S and PA-487 S. This route spans approximately 19 miles and can be completed in roughly 30 minutes, depending on traffic conditions.

To calculate the cost of this route, we'll apply the same methodology as we did for Route 1. The additional distance of 6 miles compared to Route 1 will result in the consumption of approximately 0.24 gallons more gas for a one-way trip.

Cost = Gas Price per Gallon * Gallons Consumed
Cost = $3.20 * 0.76
Cost ≈ $2.43 (one-way)

Considering the round trip, the total cost for this route will be approximately $4.86.

Route 3: Via I-80 E and PA-487 N

If you prefer a longer but potentially faster route, you can consider going via I-80 E and PA-487 N. This route spans approximately 22 miles and can be completed in around 25 minutes, depending on traffic conditions.

Using the same calculations as before, we find that the consumption of gas for this route will be higher due to the increased distance.

Cost = Gas Price per Gallon * Gallons Consumed
Cost = $3.20 * 0.88
Cost ≈ $2.82 (one-way)

For the round trip, the total cost for this route will be approximately $5.64.

After considering the costs, distances, and estimated travel times for each route, it is clear that Route 1 via PA-93 S is the most economical option for traveling between Berwick and Benton. With the lowest total cost of $3.32 for a round trip and a travel time of around 40 minutes (20 minutes each way), Route 1 strikes the best balance between the expense and convenience of travel.

Conclusion

When planning a trip between Berwick and Benton, it is essential to consider the cost and distance associated with each route. By choosing Route 1 via PA-93 S, you can keep your travel expenses low without compromising too much on travel time. This scenic route, spanning approximately 13 miles, will cost you around $3.32 for a round trip, factoring in current gas prices. The estimated travel time of approximately 40 minutes makes it a convenient choice. So, buckle up, hit the road, and enjoy your journey from Berwick to Benton!