Exploring the Cost of Driving from Berkley to Dexter Township in Michigan
If you're planning a road trip from Berkley to Dexter Township in Michigan, there are several factors you need to consider. For instance, you need to decide on the best route, calculate the distance, assess the time it will take to get there, and consider the cost of gas – a crucial factor nowadays. In this post, we'll explore the different routes you can take and highlight the cost of driving based on current gas prices.
Route 1: Via I-96 W and M-52 S
The first route option is via I-96 W and M-52 S and is approximately 37 miles. This route takes approximately 44 minutes without traffic. If you're leaving on a weekday afternoon, the chances are high that you'll run into traffic in some areas.
To estimate the cost of gas, we will use the current gas prices in Berkley, which is about $3.13 per gallon as of August 2021. An average car can cover 25 miles on one gallon of gas. Thus, for this route, you'll need approximately 1.5 gallons of gas, which translates to $4.70. The cost of tolls is $0.
Summary
- Distance: 37 miles
- Time: 44 minutes
- Gas cost: $4.70
- Toll cost: $0
Route 2: Via M-14 and N Territorial Road
The second route option is via M-14 and N Territorial Road and is approximately 36 miles. This route takes approximately 38 minutes without traffic.
In estimating the cost of gas, we will also use the current gas prices in Berkley, which is about $3.13 per gallon. Since the distance of the route is almost the same as Route 1, you'll require approximately 1.5 gallons of gas, which translates to $4.70. However, this route requires you to pass through tolls. The cost of tolls is approximately $3.00.
Summary
- Distance: 36 miles
- Time: 38 minutes
- Gas cost: $4.70
- Toll cost: $3.00
Route 3: Via Beck Road
The third route option is via Beck Road and is approximately 40 miles. This route takes approximately 50 minutes without traffic.
Using the current gas prices in Berkley, which is about $3.13 per gallon, an average car can cover 25 miles on one gallon of gas. Thus, for this route, you'll need approximately 1.6 gallons of gas, which translates to $5.01. The cost of tolls is $0.
Summary
- Distance: 40 miles
- Time: 50 minutes
- Gas cost: $5.01
- Toll cost: $0
Route 4: Via M-10
The fourth and final route option is via M-10 and is approximately 41 miles. This route takes approximately 50 minutes without traffic.
Using the current gas prices in Berkley, which is about $3.13 per gallon, an average car can cover 25 miles on one gallon of gas. Thus, for this route, you'll need approximately 1.65 gallons of gas, which translates to $5.18. The cost of tolls is $0.
Summary
- Distance: 41 miles
- Time: 50 minutes
- Gas cost: $5.18
- Toll cost: $0
Conclusion
When exploring the cost of driving from Berkley to Dexter Township in Michigan, several factors come into play. You need to decide on the best route, calculate the distance, assess the time it will take, and, most importantly, consider the cost of gas. Depending on your preference, you can choose one of the four routes outlined above. By considering these factors, you'll make a well-informed decision and get the most out of your trip without hurting your pockets.