meetways logo
  • Home
  • About Us
  • Meet Business
  • Mobile
  • Contact Us

Driving Cost from Berea, Ohio to Kent, Ohio

  • Halfway Point
  • Points of Interest
  • Travel Time
  • Travel Cost
A picture depicting a gas pump

The Cost of Driving From Berea, Ohio to Kent, Ohio based on Current Gas Prices

Are you planning a trip from Berea to Kent and wondering how much it's going to cost you? We've got you covered! In this blog post, we're going to break down the cost of driving from Berea to Kent based on current gas prices.

Route 1: via I-480 E and OH-43 S

The first route we'll look at is the most direct route, which is via I-480 E and OH-43 S. This route is approximately 23.7 miles long and takes about 30 minutes to complete without traffic.

If you're driving a car that gets an average of 25 miles per gallon and gas prices are at $2.40 per gallon, you'll need about 1 gallon of gas for this route. That means the total cost of gas will be around $2.40. There are also no tolls on this route.

Route 2: via OH-237 S and I-77 S

Another route you could take is via OH-237 S and I-77 S. This route is a bit longer at approximately 29.6 miles and takes around 35 minutes to complete without traffic.

Using the same calculations as before, you'll need about 1.2 gallons of gas for this route, which brings the total cost to around $2.88. There are also no tolls on this route.

Route 3: via I-71 S and I-76 E

If you're looking for a scenic drive, you could take I-71 S and I-76 E. This route is approximately 32.9 miles long and takes about 40 minutes to complete without traffic.

Using the same calculations as before, you'll need about 1.3 gallons of gas for this route, which brings the total cost to around $3.12. There is also a toll of $1.50 on this route.

Route 4: via I-480 E and OH-14 E

The final route we'll look at is via I-480 E and OH-14 E. This route is approximately 28.9 miles long and takes around 35 minutes to complete without traffic.

Using the same calculations as before, you'll need about 1.2 gallons of gas for this route, which brings the total cost to around $2.88. There is also one toll of $2 on this route.

Conclusion

In conclusion, the cost of driving from Berea to Kent varies depending on the route you take. Based on current gas prices, the cheapest route is via I-480 E and OH-43 S with a total cost of $2.40. The most expensive route is via I-71 S and I-76 E with a total cost of $3.12. It's important to note that these prices are subject to change based on the current gas prices and any toll increases.

Safe travels!

56,575,914 Halfway points found so far

;

Making finding a middle point between two address easier than ever.

  • About Us
  • List of Countries
  • Our Team
  • Press
  • Meet Business
  • MeetWays Mobile
  • Contact Us
  • Frequently Asked Questions
  • Meeting Points
  • Popular Searches
  • Site Map
  • Privacy Policy
  • Terms of Service

meetways.com © 2008 - 2025 Arandola, LLC