The Cost of Driving from Belvidere to Phillipsburg: Based on Current Gas Prices

Are you planning a road trip from Belvidere to Phillipsburg? You might be wondering how much it will cost you. Well, the cost of driving between these two New Jersey cities depends on several factors, such as the route you choose, the distance you cover, and the gas prices and toll rates at the time of your journey.

In this post, we'll explore different routes from Belvidere to Phillipsburg and highlight the distance, time, and cost of each route based on current gas prices and toll charges. Let's get started!

Route 1: Via NJ-31 S

The first route we'll consider is via NJ-31 S. This route is 8.4 miles long and takes around 15 minutes to drive, depending on traffic conditions.

The approximate gas cost for this route is $1.50 (assuming your car runs on gas and gets an average of 25 miles per gallon). There are no tolls on this route, so the total cost of driving from Belvidere to Phillipsburg on this route is about $1.50.

Route 2: Via NJ-57 W and NJ-122 S

The second route we'll look at is via NJ-57 W and NJ-122 S. This route is a bit longer than the first route, covering a distance of 10.6 miles. However, it takes approximately the same time as the first route, around 15 minutes.

The approximate gas cost for this route is $1.90. While there are no tolls on NJ-57, you'll have to cross the Delaware River Toll Bridge to enter Pennsylvania (which is part of the route). The toll rates on this bridge depend on the vehicle type and time of day. For a car, the toll rates are $1.00 (off-peak) or $1.25 (peak hours). So the total cost of driving from Belvidere to Phillipsburg on this route ranges from $2.90 (off-peak) to $3.15 (peak hours).

Route 3: Via NJ-173 W and NJ-122 S

The third and final route we'll consider is via NJ-173 W and NJ-122 S. This route covers a distance of 12.6 miles and takes approximately 20 minutes to drive, depending on traffic conditions.

The approximate gas cost for this route is $2.10. There are no tolls on NJ-173, but you'll have to cross the Delaware River Toll Bridge (same as the second route) to enter Pennsylvania. So the total cost of driving from Belvidere to Phillipsburg on this route ranges from $3.10 (off-peak) to $3.35 (peak hours), depending on the time of day and toll rates.

Conclusion

So, there you have it - the cost of driving from Belvidere to Phillipsburg based on current gas prices and toll charges. As you can see, the total cost of the trip ranges from $1.50 to $3.35, depending on the route you choose, the distance you cover, and the time of day you travel.

We hope this post helped you plan your road trip, and we wish you a safe and enjoyable journey ahead!