The Cost of Driving from Bellevue, Ohio to Milford, Ohio: A Friendly Guide

Planning a road trip can be fun, but it's important to factor in the cost of gas and tolls. If you're driving from Bellevue, Ohio to Milford, Ohio, you'll want to know the different routes, the distance, the time it takes, and the cost.

Route 1: I-71S

If you take this route, the distance from Bellevue to Milford is 218 miles and it will take you approximately 3 hours and 45 minutes to arrive at your destination. Based on current gas prices of $2.87 per gallon, you can expect to pay around $30 in gas. There are no tolls on this route.

Route 2: US-30E and I-71S

Alternatively, you could take this route, which is slightly longer at 226 miles and takes around 4 hours. However, you'll save a couple of dollars on gas, as you'll use less of it driving on US-30E. Expect to spend about $28 on gas. There are no tolls on this route.

Route 3: I-75S and I-275E

This route is even longer at 240 miles and will take about 4 hours and 15 minutes. However, it does have a toll, so expect to spend about $8 on tolls. Gas prices are the same as the other routes, so you can expect to spend about $30 on gas.

Conclusion

Ultimately, the cost of driving from Bellevue, Ohio to Milford, Ohio will depend on your route. If you're looking to save a couple of dollars and time is not a concern, taking Route 2 might be your best option. If you'd rather take the fastest route and don't mind spending a little more on gas, Route 1 might be the way to go. And if you don't mind spending a little extra on tolls, Route 3 could be your best bet. Happy travels!