The Cost of Driving From Belleville, New Jersey to Baltimore, Maryland
Are you planning a road trip from Belleville, New Jersey to Baltimore, Maryland? Before hitting the road, it's important to consider the cost of your journey. In this blog post, we will explore the different routes you can take, the distance of each route, the estimated time of travel, and the cost based on current gas prices. Let's dive in!
Route 1: I-95 S
If you prefer the most direct route, taking Interstate 95 South is your best bet. The distance from Belleville to Baltimore via this route is approximately 200 miles. Depending on traffic conditions, you can expect to spend around 3.5 to 4 hours on the road.
Now, let's talk about the cost involved. The gas prices in the area are currently around $2.50 per gallon. Considering your vehicle's average fuel efficiency, which is typically measured in miles per gallon (MPG), you can estimate the amount of gas required. Let's assume your car averages around 25 MPG.
The total amount of gas needed for this trip would be:
200 miles / 25 MPG = 8 gallons of gas
Multiplying the amount of gas needed by the current gas price, we can calculate the cost of fuel:
8 gallons x $2.50 = $20
Additionally, don't forget to factor in any tolls along the way. Depending on the specific toll roads you encounter, you can expect to pay around $15 in total. This includes several toll booths along the Interstate 95 route.
Route 2: I-80 W-309 S-I-476 S-I-95 S
If you are up for a slightly longer but potentially more scenic route, you can consider taking a combination of Interstate 80 West, Route 309 South, Interstate 476 South, and finally merging onto Interstate 95 South towards Baltimore.
The distance via this route is approximately 225 miles. You should allocate around 4 to 4.5 hours of travel time, considering possible traffic and enjoying the view along the way.
Let's calculate the estimated cost using the same gas price and vehicle fuel efficiency mentioned earlier.
The total amount of gas needed for this trip would be:
225 miles / 25 MPG = 9 gallons of gas
Using the current gas price of $2.50 per gallon:
9 gallons x $2.50 = $22.50
When it comes to tolls, this route includes a few toll booths as well. The toll costs are similar to Route 1, totaling around $15.
Route 3: I-280 W-I-78 W-309 S-I-476 S-I-95 S
For those who prefer a more scenic drive and are willing to take a slightly longer route, consider taking Interstate 280 West, Interstate 78 West, Route 309 South, Interstate 476 South, and finally merging onto Interstate 95 South towards Baltimore.
The distance via this route is approximately 240 miles. Be prepared for a travel time of around 4.5 to 5 hours due to the distance and potential traffic.
Calculating the estimated cost using the same gas price and vehicle fuel efficiency:
The total amount of gas needed for this trip would be:
240 miles / 25 MPG = 9.6 gallons of gas
Using the current gas price of $2.50 per gallon:
9.6 gallons x $2.50 = $24
Regarding tolls, this route is similar to Route 1 and Route 2. Expect to pay around $15 in total.
Final Thoughts and Considerations
Before embarking on your road trip from Belleville, New Jersey to Baltimore, Maryland, it's important to consider the distance, time, and cost involved for each route.
Route 1 offers the shortest distance of 200 miles and takes approximately 3.5 to 4 hours. The estimated cost of gas is around $20, and tolls amount to $15.
Route 2 presents a slightly longer distance of 225 miles and requires around 4 to 4.5 hours of travel time. The estimated cost of gas is approximately $22.50, and tolls are also around $15.
Route 3 offers a scenic drive but comes at a longer distance of 240 miles with a travel time of 4.5 to 5 hours. The estimated cost of gas is approximately $24, with tolls totaling around $15.
Consider your budget, time constraints, and preference for a scenic drive when choosing the route that suits you best. Safe travels and enjoy your trip to Baltimore, Maryland!