The Cost of Driving from Bel Air, Maryland to Upperco, Maryland

Looking to take a road trip from Bel Air, Maryland to Upperco, Maryland? You might be wondering about the cost of the trip based on current gas prices. Here are some possible routes, the distance of each route, the time it takes, and the cost of each route.

Route 1: Via I-83 N

This is the most direct route, taking you up I-83 N for about 30 miles. According to Google Maps, this route takes around 40 minutes without traffic (which tends to be a problem near Baltimore during rush hour). The total distance is about 30.2 miles, and you'll need to pay a round trip toll of $4. Typically, cars get about 24 miles per gallon on highways, so you'll need approximately 1.26 gallons of gas. With gas prices around $2.70 per gallon, that comes out to a total cost of around $3.40 for gas.

Route 2: Via MD-165 N and MD-23 W

If you're looking for a scenic drive through the countryside, this route might be the way to go. According to Google Maps, this route takes around 45-50 minutes, spanning 21.9 miles. There are no tolls on this route, but you will need approximately 0.91 gallons of gas. With gas prices around $2.70 per gallon, that will cost you around $2.50 for gas.

Route 3: Via Bel Air Rd and MD-23 W

This route takes you through a mix of suburban and rural areas, with a few traffic lights along the way. According to Google Maps, this route takes around 50-55 minutes, spanning about 22.0 miles. There are no tolls on this route, but you will need approximately 0.92 gallons of gas. With gas prices around $2.70 per gallon, that will cost you around $2.50 for gas.

Route 4: Via US-1 N and MD-23 W

This route is the longest and takes you the farthest east, taking you up US-1 before turning west onto MD-23. According to Google Maps, this route takes around 55-60 minutes, spanning about 30.5 miles. There are no tolls on this route, but you will need approximately 1.27 gallons of gas. With gas prices around $2.70 per gallon, that will cost you around $3.40 for gas.

In summary, the total cost of driving from Bel Air, Maryland to Upperco, Maryland ranges from around $2.50 to $3.40 in gas, depending on which route you take. Whether you prefer a direct route or a scenic route, there are plenty of options available to get you there. So pack your snacks, buckle up, and hit the road!