How Much to Drive from Bel Air, Maryland to Pikesville, Maryland?
If you're planning on taking a road trip from Bel Air, Maryland to Pikesville, Maryland, then you're probably wondering how much it will cost. Luckily, we've done all the research for you! Here's a breakdown of the costs based on the current gas prices.
Route 1: US-1 N and I-695
The first route we recommend is taking US-1 N and I-695. This route is 33 miles long and takes about 39 minutes without traffic. You'll need to pay a toll of $4.00 to cross the John F. Kennedy Memorial Highway. Here's the breakdown of the cost:
- Distance: 33 miles
- Time: 39 minutes
- Gas cost: $5.28
- Toll cost: $4.00
- Total cost: $9.28
Route 2: MD-543 N and I-95 N
The second route we recommend is taking MD-543 N and I-95 N. This route is slightly longer, at 37 miles, but will only take 38 minutes without traffic. You'll need to pay a toll of $8.00 to cross the John F. Kennedy Memorial Highway and the Fort McHenry Tunnel. Here's the breakdown of the cost:
- Distance: 37 miles
- Time: 38 minutes
- Gas cost: $6.08
- Toll cost: $8.00
- Total cost: $14.08
Route 3: MD-147 W and I-695
The third route we recommend is taking MD-147 W and I-695. This route is the shortest, at only 29 miles, but will take 42 minutes without traffic. You'll need to pay a toll of $7.20 to cross the Thomas J. Hatem Memorial Bridge. Here's the breakdown of the cost:
- Distance: 29 miles
- Time: 42 minutes
- Gas cost: $4.76
- Toll cost: $7.20
- Total cost: $11.96
Conclusion
As you can see, there are different routes you can take to get from Bel Air to Pikesville. While some routes are shorter, others are more expensive due to tolls. Ultimately, the choice is yours based on your budget and time preference. Keep in mind that gas prices fluctuate regularly, so double-check before hitting the road. Have a safe trip!