Driving Cost from Bel Air, Maryland to Philadelphia, Pennsylvania

A picture depicting a gas pump

The Cost of Driving from Bel Air, Maryland to Philadelphia, Pennsylvania

If you're planning a road trip from Bel Air, Maryland to Philadelphia, Pennsylvania, you might be wondering how much it's going to cost you. Gas prices can fluctuate, tolls can add up, and different routes can make a big difference in the total cost. In this blog post, we'll break down the cost of driving from Bel Air to Philadelphia based on the current gas prices.

Route 1: Via I-95 S

The most direct route from Bel Air to Philadelphia is via I-95 S. This route covers a distance of 97 miles and takes approximately 1 hour and 40 minutes to complete. The total cost for this route would be:

  • Gas: Based on the current average gas price in Maryland and Pennsylvania, which is around $2.70 per gallon, and assuming a car with an average fuel efficiency of 25 miles per gallon, the total cost of gas for this route would be approximately $26.
  • Tolls: There are several tolls on this route, including the Hatem Bridge toll and the Baltimore Fort McHenry Tunnel toll. The total cost for tolls would be $13.60.

Total cost for Route 1: $39.60

Route 2: Via US-1 and I-476 S

Another option for driving from Bel Air to Philadelphia is to take US-1 and I-476 S. This route covers a longer distance of 106 miles but can be faster depending on traffic conditions. The estimated time for this route is 1 hour and 50 minutes. The total cost for this route would be:

  • Gas: Using the same data as above, the total cost of gas for this route would be approximately $28.50.
  • Tolls: There are fewer tolls on this route, with a total cost of $6.30.

Total cost for Route 2: $34.80

Route 3: Via US-1 and I-95 S

Finally, you could also take US-1 and I-95 S to get from Bel Air to Philadelphia. This route covers a distance of 104 miles and takes around 1 hour and 50 minutes. The total cost for this route would be:

  • Gas: With the same gas and fuel efficiency data as before, the total cost of gas for this route would be approximately $28.
  • Tolls: There are also fewer tolls on this route, with a total cost of $6.30.

Total cost for Route 3: $34.30

Conclusion

In conclusion, the cost of driving from Bel Air, Maryland to Philadelphia, Pennsylvania can vary depending on the route you take. Based on the current gas prices and toll rates, the cheapest route would be Route 3 via US-1 and I-95 S, with a total cost of $34.30. However, if you want to save time and don't mind paying a bit more, Route 1 via I-95 S might be a better option. Whatever route you choose, we wish you a safe and enjoyable road trip!