Driving Cost from Bedford, Texas to Georgetown, Texas

A picture depicting a gas pump

The Cost of Driving from Bedford, Texas to Georgetown, Texas

Are you planning a trip from Bedford, Texas to Georgetown, Texas? If so, you're probably curious about the cost of driving. Keep reading to find out the cost of each route, considering current gas prices.

The Route via I-35 N

The most common way to get from Bedford to Georgetown is by using interstate 35 North. The distance of this route is 168 miles and it takes approximately 2 hours and 45 minutes.

Here is a breakdown of the costs of driving via I-35 N:

  • Gasoline cost: with an average fuel economy of 25 mpg and current prices of $2.19 per gallon, you'll need to use around 7 gallons of gas. This will cost you approximately $15.33.
  • Toll cost: there are tolls to pay along this route that can add up to an additional expense of around $8.70.

So, in total, it will cost you around $24.03 to drive from Bedford to Georgetown using the I-35 N route.

The Route via US-77 N and TX-130 N

Another option to get to Georgetown from Bedford is by using US-77 N and TX-130 N. This route is slightly shorter, measuring 141 miles, but can take longer due to heavy traffic. It takes approximately 3 hours.

Here is a breakdown of the costs of driving via US-77 N and TX-130 N:

  • Gasoline cost: with an average fuel economy of 25 mpg and current prices of $2.19 per gallon, you'll need to use around 6 gallons of gas. This will cost you approximately $13.14.
  • Toll cost: there are tolls to pay along this route that can add up to an additional expense of around $12.10.

So, in total, it will cost you around $25.24 to drive from Bedford to Georgetown using the US-77 N and TX-130 N route.

The Route via TX-183 W and TX-195 N

The third option to take you from Bedford to Georgetown is by using TX-183 W and TX-195 N. This route is longer than the others, covering 191 miles, but it is often a less busy route. It takes approximately 3 hours and 15 minutes.

Here is a breakdown of the costs of driving via TX-183 W and TX-195 N:

  • Gasoline cost: with an average fuel economy of 25 mpg and current prices of $2.19 per gallon, you'll need to use around 8 gallons of gas. This will cost you approximately $17.52.
  • Toll cost: there are no tolls to pay along this route.

So, in total, it will cost you around $17.52 to drive from Bedford to Georgetown using the TX-183 W and TX-195 N route.

Summary

In summary, the total cost to drive from Bedford to Georgetown ranges between $17.52 to $25.24, depending on the route you choose. While the expense may be a factor to consider, it's important to factor in the amount of time as well, as all routes can take between 2.5 to 3.5 hours to get to Georgetown. Safe travels!