Planning a Road Trip from Bar Harbor, Maine to Darby Township, Pennsylvania: How Much Does It Cost?

Are you planning a road trip from Bar Harbor, Maine to Darby Township, Pennsylvania? If so, you might be wondering how much it costs and which route to take. With gas prices on the rise, knowing the cost of each route can help you budget accordingly and make the most of your trip. In this blog post, we'll break down the different routes, distance, time, and cost of driving from Bar Harbor to Darby Township.

Route 1: The I-95 South

The most direct route from Bar Harbor to Darby Township is the I-95 South, which takes approximately 7 hours and covers a distance of 479 miles. If you choose this route, you'll pass through some scenic areas of Maine, New Hampshire, and Massachusetts before reaching Pennsylvania. However, keep in mind that this is the most expensive route due to tolls, which will cost you around $49 (based on a passenger car). Additionally, the average gas prices range from $2.60 to $3.10 per gallon in Maine, New Hampshire, and Massachusetts, and $2.90 to $3.20 per gallon in Pennsylvania. Depending on the gas mileage of your vehicle and current gas prices, you can expect to spend around $97 to $120 on gas.

Cost: $146 - $169

Distance: 479 miles

Time: 7 hours

Route 2: The I-90 West

If you have more time and want to see some of the best New England scenery, you can take the I-90 West through upstate New York. This route takes approximately 10 hours and covers a distance of 622 miles. While this route is longer, it's also cheaper in terms of tolls, costing around $31 (based on a passenger car). Additionally, gas prices are typically lower in upstate New York compared to other states, ranging from $2.50 to $2.80 per gallon. Depending on current gas prices and your vehicle's gas mileage, you can expect to spend around $109 to $125 on gas.

Cost: $140 - $156

Distance: 622 miles

Time: 10 hours

Route 3: The Coastal Route

If you're looking for a scenic drive, consider taking the coastal route from Bar Harbor to Darby Township. This route takes you through Boston, Providence, and Newport, allowing you to see some of the most picturesque coastal towns along the way. While this route is the longest, covering a distance of 672 miles, it's also cheaper in terms of tolls, costing around $29 (based on a passenger car). Additionally, the average gas prices range from $2.60 to $3.10 per gallon in Maine, New Hampshire, and Massachusetts, and $2.90 to $3.20 per gallon in Pennsylvania. Depending on current gas prices and your vehicle's gas mileage, you can expect to spend around $115 to $140 on gas.

Cost: $144 - $169

Distance: 672 miles

Time: 11 hours

Conclusion

When planning a road trip from Bar Harbor, Maine, to Darby Township, Pennsylvania, there are several different routes to choose from, each with their own unique benefits and costs. Whether you're looking for a direct route with minimal stops or a scenic drive with picturesque views, knowing the distance, time, and cost of each route can help you plan your trip accordingly. By using this guide, you can budget for gas and tolls without breaking the bank, ensuring you have a fun and enjoyable road trip.