The Cost of Driving from Baltimore, Maryland to Pikesville, Maryland

Are you planning a road trip from Baltimore, Maryland to Pikesville, Maryland? Before you hit the road, it's important to consider the cost of driving. Gas and toll prices can add up quickly, so it's crucial to plan your route and calculate your expenses beforehand. In this blog post, we will discuss the different routes you can take, the distance of each route, the time it takes, and the cost of each route based on current gas prices.

Route 1: Via I-83 N

The first route we suggest is via I-83 N. This is the most straightforward route to take, as it takes you straight from Baltimore to Pikesville. The distance between the two places is around 8.5 miles, and it takes approximately 15-20 minutes to drive, depending on traffic. The cost of gas for this route will depend on the current gas prices. In Baltimore, as of August 2021, the average gas price is around $3.00 per gallon. Assuming your car gets around 25 miles per gallon on the highway, you will need around 0.34 gallons of gas for this trip. Therefore, the estimated cost of gas will be approximately $1.02.

Route 2: Via I-695 W

The second route we recommend is via I-695 W. This route is slightly longer than the first one, with a distance of approximately 9.5 miles. The time it takes to get to Pikesville via I-695 W is around 20-25 minutes, depending on traffic. However, taking this route can save you some money on tolls. If you take this route, you will need to pay a toll of $3.00 at the Baltimore Harbor Tunnel. The estimated cost of gas for this route will still be around $1.02, based on the gas prices and the car's fuel efficiency.

Route 3: Via I-795 N

The third and final route we suggest is via I-795 N. This route is the longest of the three, with a distance of approximately 12 miles. However, taking this route can save you some money on both gas and tolls. The time it takes to reach your destination via this route is around 25-30 minutes, depending on traffic. If you take this route, you will not have to pay any tolls. The estimated cost of gas for this route will be around $1.36, assuming the same current gas prices and fuel efficiency as before.

Conclusion

In conclusion, there are a few different routes you can take when driving from Baltimore, Maryland to Pikesville, Maryland. The three main routes discussed above are via I-83 N, I-695 W, and I-795 N. Depending on your priorities, you can choose the route that is the shortest, cheapest, or fastest. No matter which route you choose, it's essential to factor in gas and toll prices to estimate the total cost of your trip. Safe travels!