How Much Does It Cost to Drive from Baltimore to Parkville?
If you're planning a road trip from Baltimore, Maryland to Parkville, Maryland, you're likely wondering about the cost involved. With gas prices fluctuating constantly, it can be tough to know how much you'll need to budget for your journey. In this post, we'll break down the price of driving from Baltimore to Parkville, giving you a better idea of what to expect.
Route 1: Using I-695 N
The most direct route from Baltimore to Parkville is along Interstate 695 North, which takes you northeast towards the Pennsylvania border and then south towards Parkville. This route is approximately 12 miles long and typically takes around 15-20 minutes without traffic.
Using AAA's gas price calculator, the average gas price in Baltimore as of August 2021 is $3.05 per gallon. With a car that gets 25 miles per gallon, you can expect to use about $1.22 worth of gas for this route. Additionally, there is a $1.70 toll for the Fort McHenry Tunnel, which is included in the price.
Distance: 12 miles
Time: 15-20 minutes
Cost: $2.92 (Gas + Toll)
Route 2: Using I-83 N and I-695 E
Another option is to take I-83 North and then connect to I-695 East, which circumvents the city and bypasses some of the traffic congestion. This route is slightly longer than the first option, at approximately 15 miles, and will take around 20-25 minutes without traffic.
Using the same gas price and car information from above, you can expect to use about $1.52 worth of gas for this route. There is no toll for this route.
Distance: 15 miles
Time: 20-25 minutes
Cost: $1.52 (Gas only)
Route 3: Using Harford Road
For a more scenic option, you can take Harford Road all the way from Baltimore to Parkville. This route is approximately 11 miles long but may take longer than the previous options due to traffic and stoplights.
Using the same gas price and car information, you can expect to use about $1.08 worth of gas for this route. There are no tolls for this option.
Distance: 11 miles
Time: Varies
Cost: $1.08 (Gas only)
Overall, the cost of driving from Baltimore to Parkville ranges from around $1 to $3, depending on the route you choose. Of course, this price may fluctuate based on the current gas prices, so be sure to check prices before embarking on your trip. Happy driving!