Driving Cost from Baltimore, Maryland to Lusby, Maryland

A picture depicting a gas pump

The Cost of Driving from Baltimore, Maryland to Lusby, Maryland

Are you planning a road trip from Baltimore, Maryland to Lusby, Maryland? It's always a great idea to know the cost of your trip before hitting the road. In this blog post, we'll highlight the different routes, distance, time, and cost of each route based on current gas prices and toll charges.

Route 1: Baltimore-Washington Parkway

The first route is the Baltimore-Washington Parkway. This route is the most direct, starting in Baltimore and ending in Lusby. The distance is approximately 62 miles and it takes about 1 hour and 15 minutes to complete.

The estimated cost of this route is as follows:

  • Gas: Assuming a gas price of $2.50 per gallon and a fuel economy of 25 miles per gallon, you will need approximately 2.5 gallons of gas for this trip, which will cost about $6.25.
  • Toll: There is no toll on this route.

Total Cost: $6.25

Route 2: I-95 S and MD-4 S

The second route is I-95 S and MD-4 S. This route takes a little longer but is slightly cheaper. It starts in Baltimore and ends in Lusby, covering a distance of approximately 65 miles. The estimated time to complete this route is about 1 hour and 20 minutes.

The estimated cost of this route is as follows:

  • Gas: Assuming a gas price of $2.50 per gallon and a fuel economy of 25 miles per gallon, you will need approximately 2.6 gallons of gas for this trip, which will cost about $6.50.
  • Toll: You will need to cross the William Preston Lane Jr. Memorial (Bay) Bridge which costs $2.50 for two-axle vehicles.

Total Cost: $9.00

Route 3: MD-2 S and MD-261 S

The third route is MD-2 S and MD-261 S. This route is the longest but offers scenic views of the Chesapeake Bay as it runs along the coast. The total distance for this route is approximately 72 miles, and it takes about 1 hour and 40 minutes to complete.

The estimated cost of this route is as follows:

  • Gas: Assuming a gas price of $2.50 per gallon and a fuel economy of 25 miles per gallon, you will need approximately 2.9 gallons of gas for this trip, which will cost about $7.25.
  • Toll: There is no toll on this route.

Total Cost: $7.25

Conclusion

In conclusion, the total cost of driving from Baltimore, Maryland to Lusby, Maryland ranges from $6.25 to $9.00, depending on the route you take. The cheapest route is the Baltimore-Washington Parkway, followed by MD-2 S and MD-261 S and the most expensive is I-95 S and MD-4 S. Remember to check gas prices, toll charges, and road works before planning a trip and drive safely!