Driving Cost from Baltimore, Maryland to College Park, Maryland

A picture depicting a gas pump

The Cost of Driving from Baltimore to College Park: A Guide

Are you planning a road trip from Baltimore to College Park, Maryland? Well, you’re in luck as we’ve got you covered. Before packing up your car and hitting the road, it’s important to know how much you’ll be shelling out for gas and toll fees. In this guide, we’ll cover the different routes, their distances and times, and the cost of each route based on current gas prices.

Route 1: I-95S

The most direct and commonly used route from Baltimore to College Park is via I-95S. This route covers approximately 30 miles and should take you about 40 minutes without traffic. The cost of gas for this route, considering the current gas prices in Maryland, could range from $3.50 to $4 per gallon. On average, you’ll probably use up around 1.5 gallons of gas, totaling around $6 to $6.50 one-way. There are no toll fees for this route, making it the most economical one.

  • Distance: 30 miles
  • Time: 40 minutes
  • Gas Cost (one-way): $6 to $6.50 (no toll fees)

Route 2: MD-295S and I-95S

An alternate route from Baltimore to College Park is to take MD-295S towards Washington D.C. and merge onto I-95S. This route covers around 35 miles and should take you about 45 minutes. The cost for this route would be similar to the previous route, with gas prices ranging from $3.50 to $4 per gallon. You might use up around 2 gallons of gas, totaling around $8 to $8.50 one-way. There are no toll fees for this route as well.

  • Distance: 35 miles
  • Time: 45 minutes
  • Gas Cost (one-way): $8 to $8.50 (no toll fees)

Route 3: I-895S and I-95S

This is another alternate route that could save you a few minutes, depending on traffic. You’ll take I-895S towards Washington D.C. and eventually merge onto I-95S. This route covers around 33 miles and should take you about 45 minutes. The gas cost for this route should be similar to the previous routes, with prices ranging from $3.50 to $4 per gallon. You might use up around 1.75 gallons of gas, totaling around $7 to $7.50 one-way. There are no toll fees for this route.

  • Distance: 33 miles
  • Time: 45 minutes
  • Gas Cost (one-way): $7 to $7.50 (no toll fees)

Route 4: I-83S and I-695W

If you don’t mind a longer drive that takes you around the city, then this route might be for you. You’ll take I-83S towards Baltimore, then merge onto I-695W. After that, you’ll merge onto I-95S towards Washington D.C. This route covers around 45 miles and should take you around 1 hour. The gas cost for this route should be higher than the previous routes, with gas prices ranging from $3.50 to $4 per gallon. You might use up around 2.5 gallons of gas, totaling around $10 to $10.50 one-way. There are no toll fees for this route.

  • Distance: 45 miles
  • Time: 1 hour
  • Gas Cost (one-way): $10 to $10.50 (no toll fees)

Conclusion

In conclusion, the most direct route via I-95S is the most economical, with no toll fees and a minimal gas cost. However, if you prefer a longer but scenic drive that passes through Baltimore, then you can take the I-83S and I-695W route. Regardless of which route you choose, it’s always a good idea to check the traffic conditions to avoid getting stuck in traffic and wasting precious time. Safe travels!