Driving Cost from Aston Township, Pennsylvania to Ashton, Maryland

A picture depicting a gas pump

The Cost of Driving From Aston Township, Pennsylvania to Ashton, Maryland

Are you planning a road trip from Aston Township, Pennsylvania to Ashton, Maryland? It's always a good idea to factor in the cost of the trip before hitting the road. In this blog post, we'll break down the different routes available, their distances, estimated travel times, and the expected costs based on current gas prices. So grab a cup of coffee, sit back, and let's start planning your journey!

Route 1: The Scenic Drive via US-1 S and US-40 W

The first route we'll explore is the scenic drive down US-1 S and US-40 W. This route covers a distance of approximately 115 miles. The estimated travel time varies between 2.5 to 3 hours, depending on traffic and weather conditions.

To calculate the cost of this route, let's assume the current gas price is $2.50 per gallon. Considering an average fuel efficiency of 25 miles per gallon on your vehicle, you would need around 4.6 gallons of gas for this trip. Multiplying the gallons by the gas price, your total cost for gas would be $11.50.

Additionally, there are a few tolls along this route. The estimated toll prices can amount to around $10. So, the total cost for this route would be approximately $21.50.

Route 2: The Highways via I-76 W and I-70 W

If you prefer a faster route, you can take the highways. Start by heading west on I-76 W, and then merge onto I-70 W towards Ashton. This route covers a distance of approximately 120 miles. The estimated travel time for this route ranges from 2.5 to 3 hours.

Using the same gas price and fuel efficiency considerations, you would need around 4.8 gallons of gas for this trip. This amounts to a cost of $12 for gas.

Along this route, there are a couple of tolls as well. These toll prices can add up to around $15. Thus, the total cost for this route would be approximately $27.

Route 3: The Quickest Route via US-202 S and I-95 S

If time is of the essence, you might want to take the quickest route. Start by heading south on US-202 S, then merge onto I-95 S, and finally, take exit 33 towards Ashton. This route covers a distance of approximately 105 miles. The estimated travel time for this route is around 2 to 2.5 hours.

Following the same calculations, you would require approximately 4.2 gallons of gas for this trip, resulting in a cost of $10.50 for gas.

Similar to the other routes, there are a few tolls along this way, totaling around $8. Therefore, the total cost for this route would be approximately $18.50.

Conclusion

Now that we've explored three different routes from Aston Township, Pennsylvania to Ashton, Maryland, we can summarize the estimated costs for each route based on current gas prices:

  • Route 1: The Scenic Drive via US-1 S and US-40 W

    • Distance: 115 miles
    • Travel Time: 2.5 to 3 hours
    • Gas Cost: $11.50
    • Toll Cost: $10
    • Total Cost: $21.50

  • Route 2: The Highways via I-76 W and I-70 W

    • Distance: 120 miles
    • Travel Time: 2.5 to 3 hours
    • Gas Cost: $12
    • Toll Cost: $15
    • Total Cost: $27

  • Route 3: The Quickest Route via US-202 S and I-95 S

    • Distance: 105 miles
    • Travel Time: 2 to 2.5 hours
    • Gas Cost: $10.50
    • Toll Cost: $8
    • Total Cost: $18.50

As always, it's important to keep in mind that gas prices and tolls may vary over time, so it's a good idea to check for the current rates before embarking on your journey. With these cost estimates in hand, you can confidently plan your trip and make sure you have enough funds for an amazing road adventure. Safe travels!