Driving Cost from Ashburn, Virginia to Bennsville, Maryland

A picture depicting a gas pump

The Cost of Driving from Ashburn, Virginia to Bennsville, Maryland

Are you planning a road trip from Ashburn, Virginia to Bennsville, Maryland? Before you hit the road, it's important to consider the cost of the trip. Gas prices can vary, and tolls might be involved, but don't worry! We've got you covered with all the information you need to budget for your journey.

Route 1: Taking I-495

One of the most common routes to reach Bennsville from Ashburn is by taking I-495, also known as the Capital Beltway. This route covers a distance of 55.3 miles, and on average, it takes about 1 hour to reach your destination.

Gas prices: Current gas prices in both Ashburn and Bennsville range from $2.50 to $2.75 per gallon. Considering an average fuel efficiency of 25 miles per gallon, you would require approximately 2.2 gallons of gas for this route.

Cost: With gas prices being around $2.60 per gallon, the cost of fuel for this route would be around $5.72.

Tolls: To take I-495, you will encounter tolls. The Woodrow Wilson Bridge, located on the Potomac River, charges a $5.60 toll in the east direction and $6.60 toll in the west direction.

Route 2: Opting for VA-28 and MD-5

If you prefer a more scenic route, you can choose to drive from Ashburn to Bennsville using VA-28 and MD-5. This alternative route covers a distance of 61.5 miles, and it takes approximately 1 hour and 15 minutes to reach Bennsville.

Gas prices: Considering the same fuel efficiency of 25 miles per gallon, you would need approximately 2.5 gallons of gas for this route.

Cost: Following the current gas prices mentioned above, the cost of gas for this route would amount to approximately $6.50.

Tolls: This route does not involve any toll charges.

Route 3: Going Through I-66 and US-301

If you're looking for a more adventurous route, you can consider taking I-66 and US-301 to reach Bennsville. This option covers a distance of 64.8 miles, and it typically takes around 1 hour and 20 minutes to reach your destination.

Gas prices: With the same fuel efficiency as before, you would need approximately 2.6 gallons of gas for this route.

Cost: Based on the current gas prices provided, the cost of gas for this route would be approximately $6.76.

Tolls: This route requires a toll payment at the Governor Harry W. Nice Memorial Bridge, which costs $6.00 for a two-axle vehicle.

Conclusion

As you plan your trip from Ashburn, Virginia to Bennsville, Maryland, it's essential to consider the cost of driving. Based on current gas prices and toll charges, you can budget accordingly for your journey.

Here is a summary of the costs for each route:

  1. Route 1: I-495 - Distance: 55.3 miles, Time: 1 hour, Cost: $5.72 (includes tolls)
  2. Route 2: VA-28 and MD-5 - Distance: 61.5 miles, Time: 1 hour and 15 minutes, Cost: $6.50 (no tolls)
  3. Route 3: I-66 and US-301 - Distance: 64.8 miles, Time: 1 hour and 20 minutes, Cost: $6.76 (includes toll)

Now that you have a better understanding of the costs involved, you can plan your trip efficiently and enjoy the beautiful journey from Ashburn to Bennsville. Have a safe and enjoyable road trip!