The Cost of Driving From Ashburn, Virginia to Baldwin, Maryland

Are you planning a road trip from Ashburn, Virginia to Baldwin, Maryland? Before you hit the road, it’s important to consider the cost of driving. In this blog post, we’ll outline the different routes you can take, the distance of each route, the time it takes, and the cost of each route based on current gas prices.

Route 1: I-495 W and I-95 N (59.6 miles)

If you take this route, the total driving time is approximately 1 hour, depending on traffic. You’ll end up driving on the Capital Beltway and I-95 North. Unfortunately, this route does come with a toll: $4.00 for cars, plus additional fees for trucks and trailers.

Based on current gas prices, which average at $2.69 per gallon, you’ll need to budget around $8.38 in gas for this drive.

Route 2: VA-267 W and I-70 W (71.4 miles)

Another option is taking VA-267 W and I-70 W. This route will lead you through some beautiful areas of Virginia and Maryland, but it’s a bit longer than the first option. You’ll be behind the wheel for about an hour and 20 minutes.

There are no tolls on this route, but you’ll need to budget roughly $10.12 for gas based on current prices.

Route 3: US-15 N and US-40 E (83.1 miles)

The last option is to take US-15 N and US-40 E. This is a bit different from the other two options, as you’ll be taking some state highways. However, it’s the longest option and will take approximately 1 hour and 40 minutes.

There are no tolls on this route, but you’ll need to budget roughly $11.94 for gas based on current prices.

Final Thoughts

The decision on which route to take ultimately depends on the time you have available and your budget. While taking the interstate might be the quickest, it does come with a toll. On the other hand, taking state highways will be cheaper but will take a bit longer. Whichever option you choose, make sure you’ve budgeted enough for gas and other expenses you might incur on your road trip. Safe travels!