The Cost of Driving from Arlington, Virginia to Urbana, Maryland
Are you planning a road trip from Arlington, Virginia to Urbana, Maryland? If so, you're probably wondering about the cost of this journey. Lucky for you, we did some research to help you plan your trip! Here are a few different routes you could take and their associated costs based on current gas prices.
Route 1: I-495 and I-270N
The most common route from Arlington to Urbana is via I-495 and I-270 North. This route covers a distance of 43 miles and takes about 55 minutes to drive, assuming there is no traffic. However, the reality is that there is almost always traffic on these highways, so you should expect the drive to take a bit longer. You will also need to pay tolls on I-495. The cost of tolls varies depending on the time of day, but rush hour rates can be as high as $7.50.
In terms of gas, you will need to fill up your tank before starting the trip, and depending on your car's gas mileage, you should expect to spend around $6.45 in gas each way, assuming gas prices are around $2.50 per gallon.
So, the total cost for this route (assuming you fill up your tank before starting) would be:
- Tolls: $7.50
- Gas: $6.45
- Total: $13.95 each way.
Route 2: MD-355
Another route you could take is via MD-355. This route covers a longer distance of 55 miles and takes about 1 hour, 10 minutes to drive, but it is toll-free.
In terms of gas, you will need to fill up your tank before starting the trip, and depending on your car's gas mileage, you should expect to spend around $9.27 in gas each way, assuming gas prices are around $2.50 per gallon.
So, the total cost for this route (assuming you fill up your tank before starting) would be:
- Tolls: $0
- Gas: $9.27
- Total: $9.27 each way.
Route 3: I-66 and MD-85
A third route you could take is via I-66 and MD-85. This route covers a distance of 58 miles and takes about 1 hour, 10 minutes to drive, but it is toll-free.
In terms of gas, you will need to fill up your tank before starting the trip, and depending on your car's gas mileage, you should expect to spend around $9.76 in gas each way, assuming gas prices are around $2.50 per gallon.
So, the total cost for this route (assuming you fill up your tank before starting) would be:
- Tolls: $0
- Gas: $9.76
- Total: $9.76 each way.
Conclusion
As you can see, the cost of driving from Arlington, Virginia to Urbana, Maryland can vary depending on which route you choose. Route 1 is the most direct route, but it is also the most expensive due to tolls. Route 2 and Route 3 are toll-free and are similarly priced in terms of gas, but Route 2 is slightly shorter and quicker by about ten minutes.
Ultimately, the route you choose may depend on your personal preferences, traffic levels, and gas prices at the time of your trip. Regardless of which route you choose, we hope this information helps you plan your trip and gives you an idea of the costs involved. Happy driving!