Road Trip: Cost of Driving from Arlington, VA to Tysons, VA

If you're planning a road trip from Arlington to Tysons, you might be wondering about the cost of driving. Gas prices can fluctuate, and tolls can add up quickly. But don't worry, we've done the research for you! Here's a breakdown of the different routes you can take, the distance of each route, the time it takes, and the cost of each route.

Route 1: Via I-66 W and VA-123 N

This is the most direct route from Arlington to Tysons. You'll take I-66 West and then exit onto VA-123 North. The total distance is 8.5 miles, and it should take you about 15 minutes to complete the drive. There are no tolls on this route, but you will need to factor in the cost of gas.

Based on current gas prices in the area, you can expect to pay about $2.50 per gallon. If you have a car that gets an average of 25 miles per gallon, you'll use about 0.34 gallons of gas on this route. That means the total cost of gas would be around $0.85.

Route 2: Via US-50 W

If you'd like to take a longer but more scenic route to Tysons, you might consider taking US-50 West. This route takes you through residential neighborhoods and past a few parks before connecting with VA-123 North. The total distance is 9.5 miles, and it should take you about 20 minutes to complete the drive.

There are no tolls on this route, but you will need to factor in the cost of gas. Based on current gas prices in the area, you can expect to pay about $2.50 per gallon. If you have a car that gets an average of 25 miles per gallon, you'll use about 0.38 gallons of gas on this route. That means the total cost of gas would be around $0.95.

Route 3: Via I-395 N and VA-267 W

If you're coming from South Arlington, you might consider taking I-395 North and then connecting with VA-267 West. This is the longest route of the three options, but it also takes you through some scenic areas of Northern Virginia. The total distance is 16.5 miles, and it should take you about 25 minutes to complete the drive.

This route has a toll, so you'll need to factor that into your cost. If you have an E-ZPass, the toll will cost you $3.95 during peak hours and $2.95 during non-peak hours. If you don't have an E-ZPass, the toll will cost you $4.95.

You'll also need to factor in the cost of gas. Based on current gas prices in the area, you can expect to pay about $2.50 per gallon. If you have a car that gets an average of 25 miles per gallon, you'll use about 0.66 gallons of gas on this route. That means the total cost of gas would be around $1.65.

Conclusion

No matter which route you take, the cost of driving from Arlington to Tysons will depend on gas prices and tolls. Route 1 is the shortest and most direct, but the longer routes might be more scenic. Whether you're in a hurry or have time to spare, make sure you factor in the cost of gas and any tolls when planning your road trip. And most importantly, have fun on your trip to Tysons!