The Cost of Driving from Arlington Heights, Illinois to Naperville, Illinois

Are you planning a road trip from Arlington Heights to Naperville? One of the first questions you may be asking is, "What's the cost of gas and tolls going to look like?" In this blog post, we'll break down the costs of different routes between the two cities, based on current gas prices.

Route 1: Via I-290 E

One of the most direct routes from Arlington Heights to Naperville is via I-290 E. This route covers a distance of 33.2 miles and typically takes around 40 minutes to drive.

According to AAA's gas price calculator, the average gas price in the Chicago area as of June 2021 is $3.09 per gallon. Based on this, the estimated cost of gas for this route is around $4.33 (assuming a typical car with a 12-gallon tank and 25 miles per gallon gas mileage).

In addition to gas, there is a toll fee of $1.90 to take the I-355 south exit towards Naperville. So, the total cost of this route is about $6.23.

Route 2: Via I-90 W and I-290 W

Another potential route is to take I-90 W and I-290 W. This route covers a distance of 36.6 miles and typically takes around 45 minutes to drive.

Using the same gas price calculator, the estimated cost of gas for this route is around $5.12 (assuming the same car, tank size, and gas mileage as before).

This route also includes a toll fee of $3.60 to take the I-355 South exit towards Naperville. So, the total cost of this route is about $8.72.

Route 3: Via IL-53 S and I-355 S

If you want to avoid tolls, you can take a longer route using IL-53 S and I-355 S. This route covers a distance of 41.2 miles and typically takes around 50 minutes to drive.

The estimated cost of gas for this route is around $5.76 (using the same assumptions of car, tank size, and gas mileage as before).

Since this route doesn't include any toll fees, the total cost of this route is around $5.76.

Conclusion

In conclusion, the cost of driving from Arlington Heights to Naperville can vary depending on the route you take. Route 1 via I-290 E is the shortest and cheapest, with a total cost of around $6.23. Route 2 via I-90 W and I-290 W is slightly longer and more expensive at around $8.72. Finally, Route 3 via IL-53 S and I-355 S is the longest, but also the least expensive at around $5.76.

No matter which route you choose, make sure to factor in additional costs such as food, lodging, and potential traffic delays. With some planning and a little bit of flexibility, you can have a great road trip from Arlington Heights to Naperville without breaking the bank.