The Cost of a Trip Between Arbutus, Maryland and Arlington, Virginia

Are you planning on traveling between Arbutus, Maryland, and Arlington, Virginia? If so, it’s essential to factor in the cost of your trip. Depending on what mode of transportation you choose, the distance between the two cities and current gas prices, the cost can vary. In this article, we’ll break down the different route options and provide information on the cost of each one. We’ll also recommend the best route based on distance, time, and cost.

The Different Route Options

There are different ways to travel between Arbutus, Maryland, and Arlington, Virginia. The two cities are approximately 50 miles apart, and there are three main route options to choose from:

Route 1: Taking the I-95S

The I-95S is a common route used by many commuters traveling between Baltimore and Washington D.C. If you take this route, you’ll be driving for approximately 60 minutes, covering a distance of 56 miles. This route passes through Baltimore, Jessup, Laurel, Beltsville, College Park, and Washington, D.C.

Route 2: Taking the Baltimore-Washington Parkway

The Baltimore-Washington Parkway is another route that you can take between the two cities. This route follows the Baltimore-Washington Parkway and passes through Linthicum Heights, Baltimore, and then onto the I-295S towards Washington, D.C. The length of this route is approximately 52 miles, and you should be able to complete the journey in approximately 90 minutes.

Route 3: Taking the I-695 and I-295

This route is slightly longer than the other options but can save you some money on tolls. You’ll need to take the I-695 towards I-97 S/Annapolis, and from there, take the exit towards I-97W/Washington. After about five miles, take the exit for I-295S towards Washington, D.C. This route covers a distance of approximately 62 miles and should take you approximately 80 minutes to complete.

The Cost Consideration

The cost of traveling between Arbutus, Maryland, and Arlington, Virginia, will depend on several factors, including the mode of transportation and the current gas prices. Here, we’ll provide a breakdown of the cost of each route option.

Route 1: Taking the I-95S

If you choose to take the I-95S route, you’ll need to pay tolls, and the cost will vary depending on the current toll rates. As of 2021, the toll rate for this route is $4.00 for two-axle vehicles during off-peak hours and $7.00 during peak hours. Additionally, you’ll need to factor in the cost of gas, which varies depending on the current prices. As of August 2021, the average price for a gallon of gas in Maryland is $3.09 per gallon. If your car gets approximately 25 miles per gallon, you’ll use up approximately 2.2 gallons of gas, bringing the total cost of gas for this route to $6.80. Thus, the total trip cost for this route will be around $11.80 to $14.80, depending on whether you travel during peak or off-peak hours.

Route 2: Taking the Baltimore-Washington Parkway

If you choose to take the Baltimore-Washington Parkway, you won’t have to pay any tolls, but you’ll still need to factor in the cost of gas. As previously stated, the cost of gas depends on the current prices, and as of August 2021, the average price for a gallon of gas in Maryland is $3.09 per gallon. If your car gets approximately 25 miles per gallon, you’ll use up approximately 2.1 gallons of gas, bringing the total cost of gas for this route to $6.50. Thus, the total trip cost for this route will be around $6.50.

Route 3: Taking the I-695 and I-295

If you choose to take this route, you won’t have to pay any tolls, but you’ll still need to factor in the cost of gas. Using the same calculation as the previous routes, assuming a gas mileage of 25 miles per gallon and a current gas price of $3.09 per gallon, the total cost of gas for this route will be approximately $7.00. Thus, the total trip cost for this route will be around $7.00.

The Best Route

Based on distance, cost, and the current condition of the roads, the best route to take between Arbutus, Maryland, and Arlington, Virginia, is the I-95S. This route is slightly shorter than the other options, and regardless of the potential toll charges, it still has the lowest total trip cost.

Conclusion

In conclusion, there are several route options to consider when traveling between Arbutus, Maryland, and Arlington, Virginia. The three main routes include taking the I-95S, Baltimore-Washington Parkway, and the I-695, followed by the I-295. The cost of your trip will depend on the route you choose and the current cost of gas and tolls, if applicable. If you’re looking for the most cost-effective option, the I-95S is the route to take. Regardless of the route you choose, it’s crucial to consider all the costs, including gas, tolls, and any other expenses that may arise during your journey.