Take a Ride from Ambler to Whitemarsh Township: Gas Prices and Roads

Are you planning a trip from Ambler, Pennsylvania, to Whitemarsh Township, Pennsylvania? You may be wondering what the cost of the trip will be, including the cost of gas and tolls. Luckily, with today's tools and technology, planning for this trip is much easier and accurate than ever before. In this blog post, we will discuss current gas prices and the different routes you can take.

Route 1: PA-309 S

The first route you can consider is Route 1: PA-309 S. This route is approximately 9.7 miles and would take roughly 16 minutes without traffic. With moderate traffic, it may take about 25 minutes. To take this route, from Ambler, you would take Pennsylvania Avenue straight to Bethlehem Pike, continue on Bethlehem Pike to Flourtown Road, and then take a right on West Skippack Pike.

Depending on your vehicle's gas mileage, you may require around 0.3 gallons of gas, which would cost you roughly $1.08, given that gas prices are currently at $3.60 per gallon. There are no tolls on this route, so your total cost for gas would be around $1.08.

Route 2: I-276 W and I-476S

The second route is I-276 W and I-476S. This route is approximately 13.2 miles and would take roughly 20 minutes without traffic. With moderate traffic, it may take around 30-40 minutes. To take this route, from Ambler, you would take Pennsylvania Avenue to Butler Pike. Then, take a left on Butler Pike and continue on to Lafayette Hill. From there, take a right onto the I-276 W ramp towards Valley Forge. Merge onto the highway and then take exit 16 for I-476S towards Plymouth Meeting.

On this route, you may need around 0.4 gallons of gas, which would cost you roughly $1.44, based on the current gas prices. Also, there is a toll of $1.65 at the Germantown Pike EXIT on I-276, which would increase the total cost of this route to around $3.09.

Route 3: Ridge Pike and Chemical Road

Lastly, the third route you can take is Ridge Pike and Chemical Road. This route is approximately 11.9 miles and would take around 24 minutes without traffic. With moderate traffic, it may take around 40 minutes. To take this route, from Ambler, you would take Pennsylvania Avenue to Ridge Pike and then make a right onto Ridge Pike. Continue on Ridge Pike to Butler Pike and turn left onto Butler Pike. After that, take a right on Chemical Road, and you will find your destination!

You may require around 0.4 gallons of gas, which would cost you roughly $1.44, based on the current gas prices. There are no tolls on this route; therefore, the cost of gas will be your only expense, which is around $1.44.

Conclusion

Overall, the choice of route will depend on your preference for time, distance, and cost. If you don't want to spend much time on the road and want to save money on gas and tolls, then Route 1 would be your best option. Route 2 is the most extended route and is the most expensive because of the tolls. Route 3 will be the best in terms of distance and cost for your trip from Ambler to Whitemarsh Township.

Now that you have an idea of the cost, distance, and time, you can plan accordingly before starting your journey. Have a safe and enjoyable trip!