Driving Cost from Ambler, Pennsylvania to Doylestown, Pennsylvania

A picture depicting a gas pump

The Cost of Driving from Ambler, Pennsylvania to Doylestown, Pennsylvania

Whether it's for work or leisure, traveling from Ambler, Pennsylvania to Doylestown, Pennsylvania involves a fun-filled journey worth taking. However, one of the first concerns that crop up would be the cost of the trip - especially if you're trying to budget your travel plans.

Hence, I've put together some helpful information about the cost of driving to Doylestown from Ambler. With this, you can make an informed decision about the route to take, depending on the time you have and the budget you're working with.

Route 1: Via PA-309 N

This route is the quickest route to get to Doylestown from Ambler. Taking this route will cover about 16 miles and take approximately 24 minutes to reach your destination. Here's the breakdown of the expenses:

  • Gas: Based on current gas prices at $2.90 per gallon, a round trip would consume about 1 gallon of gas, meaning you spend about $5.8 on gas.
  • Toll: This route has a Lone Willow / PA 309 Toll of $1.50 one way, meaning you would pay a total of $3 for the round trip.

In total, the cost of driving from Ambler to Doylestown via PA-309 N would be around $8.8, with a travel time of approximately 24 minutes.

Route 2: Via PA-63 E and PA-611 S

If you prefer taking scenic roads, or perhaps you want to try out a different route, then traveling via PA-63 E and PA-611 S would be perfect for you. This route is a tad bit longer than the previous, covering about 20 miles with a travel time of approximately 30-35 minutes, depending on traffic and speed limits.

Here's the breakdown of expenses:

  • Gas: Using the same gas rate as earlier, this route would consume about 1.5 gallons of gas, so you should expect to spend about $8.7 on gas.
  • Toll: The route has no tolls, so you can put that extra $6 extra in your pocket!

So, in total, the cost of driving from Ambler to Doylestown via PA-63 E and PA-611 S would be about $8.7 for gas. Travel time would be approximately 30-35 minutes.

Route 3: Via West Butler Pike

If you love scenic routes and don't mind spending a bit more time on the road, traveling via West Butler Pike could be your best bet. This route covers about 16 miles, and depending on traffic and speed limits could take approximately 35 minutes.

Here's the breakdown of expenses:

  • Gas: Based on current gas prices at $2.90 per gallon, this route would consume about 1.5 gallons of gas, so you should expect to spend around $8.7 on gas.
  • Toll: This route has no tolls.

Overall, the cost of driving from Ambler to Doylestown via West Butler Pike is about $8.7, with a travel time of approximately 35 minutes.

Conclusion

In summary, traveling from Ambler to Doylestown via PA-309N (at about $8.8), PA-63 E and PA-611 S (at about $8.7), or West Butler Pike (also at about $8.7) would cost relatively the same, given the slight differences in distance and travel time.

Consider the above factors and decide which route is best-suited for your needs. Safe travels!