Driving Cost from Albany, Georgia to Clarkesville, Georgia

A picture depicting a gas pump

The Cost of Driving from Albany, Georgia to Clarkesville, Georgia

Are you planning to drive from Albany, Georgia to Clarkesville, Georgia? If so, it's a good idea to plan your route to make sure you make the most cost-effective and time-efficient choices. In this post, we'll explore several options and their costs, so you can select the best route for your needs.

Route 1: Albany to Atlanta via I-75 N and I-285 W

The first option is to drive from Albany to Clarkesville via Atlanta. This route is 279 miles long and typically takes around 4.5 hours, depending on traffic. The distance from Albany to Atlanta is 165 miles, and the rest of the route covers 114 miles.

To take this route, you will need to take I-75 N and then I-285 W around Atlanta and then follow the signs for I-85 N to Clarkesville. There are no tolls on this route, but you will use roughly 15 gallons of gasoline.

  • Distance: 279 miles
  • Time: 4.5 hours
  • Gas Cost: $39.45

Route 2: Albany to Clarkesville via I-85 N

Another option is to take I-85 N directly to Clarkesville. This route is shorter than the first and covers 244 miles, taking about 4 hours, depending on traffic.

To take this route, you will need to take I-75 N to Macon and then transfer to I-16 E. From here, you will continue onto I-75 S until you reach Newnan, where you will take I-85 N, which leads directly to Clarkesville. There are no tolls on this route, but you will use roughly 12 gallons of gasoline.

  • Distance: 244 miles
  • Time: 4 hours
  • Gas Cost: $33.96

Route 3: Albany to Clarkesville via I-85 N and GA-17 N

A third option is to take I-85 N and then GA-17 N to Clarkesville. This route is the shortest yet, covering 241 miles and taking about 4 hours, depending on traffic.

To take this route, you will need to take I-75 N to Macon and then transfer to I-16 E. From here, you will continue onto I-75 S until you reach Newnan, where you will take I-85 N until you reach Lavonia. From there, you will take GA-17 N to Clarkesville.

There are no tolls on this route, and the gas usage is lower than Route 1 and Route 2, using only roughly 11 gallons of gasoline.

  • Distance: 241 miles
  • Time: 4 hours
  • Gas Cost: $31.77

Conclusion

In conclusion, the overall cost of driving from Albany, Georgia, to Clarkesville, Georgia, is relatively comparable across the three routes we've discussed. Still, it is always better to know the route's cost and duration to ensure you don't face any surprises or have to take detours. Make your choice based on your personal preferences and needs, while keeping in mind the three options we explored.

Safe travels!