The Ultimate Guide to Driving from Aspen Hill, Maryland to Stevensville, Maryland

Are you planning a road trip from Aspen Hill, Maryland to Stevensville, Maryland but unsure of the best route to take? Perhaps you're curious about the time it takes to complete this journey. Don't worry! In this blog post, I'm going to give you all the information you need to make the most informed decision when it comes to travelling between these two cities.

The Fastest and Slowest Routes

There are a few different routes you can take when driving between Aspen Hill and Stevensville. The fastest route would be taking I-495 E and I-97 S, which is about 59 miles and usually takes about an hour to drive under normal traffic conditions. On the other hand, the slowest and longest route would be taking MD-97 S and MD-2 S, which is just over 71 miles and usually takes around 1 hour and 30 minutes to drive.

Traffic Patterns

Of course, the time it takes to get from Aspen Hill to Stevensville will largely depend on traffic patterns. If you're travelling during peak traffic hours, you should expect the drive to take longer than it would during off-peak hours. On average, you can expect your drive to take around 1 hour and 15 minutes during heavier traffic and around 1 hour during lighter traffic.

Calculating Drive Times

For the fastest route, the drive time for peak traffic can be around 1 hour and 30 minutes. On the other hand, during low traffic times, you can complete the drive in as little as 45 minutes. These times will naturally vary depending on factors such as road work, weather, and accidents, so be prepared and check traffic updates before you hit the road.

Conclusion

Ultimately, the route you choose and whether you're travelling in high or low traffic times will impact the length of your journey from Aspen Hill to Stevensville. By planning ahead and taking into consideration the different possible routes, traffic patterns, and drive times, you'll be able to ensure a smooth and enjoyable road trip. Happy travels!