Driving Time between Armonk, New York and Town of Mount Pleasant, New York

A picture depicting driving

The Ultimate Guide to Driving from Armonk, NY to Town of Mount Pleasant, NY

Are you planning a road trip from Armonk to the Town of Mount Pleasant in New York? This short guide will help you choose the best route to reach your destination based on traffic patterns and travel time.

Fastest and Slowest Routes

The fastest route from Armonk to the Town of Mount Pleasant is via I-684 South, which covers a distance of about 13 miles. This route takes approximately 20 minutes during off-peak hours and around 40 minutes during peak hours. If you take this route, you will avoid most of the traffic and reach your destination quickly.

The slowest route, on the other hand, is via Saw Mill River Parkway South. This route is longer, covering a distance of about 15.5 miles, and takes approximately 30 minutes during off-peak hours and over an hour during peak hours. This route is not recommended during rush hour as it can be quite congested.

Distance and Time Calculations

The distance between Armonk and the Town of Mount Pleasant is approximately 13 miles. However, the time it takes to reach your destination depends on the route you take and traffic conditions. During peak hours, the travel times are longer due to heavy congestion on the roads.

  • I-684 South: Distance - 13 miles; Time - 20 minutes (off-peak), 40 minutes (peak)
  • Saw Mill River Parkway South: Distance - 15.5 miles; Time - 30 minutes (off-peak), over an hour (peak)

Choosing the Best Route

If you're looking for the fastest route, I-684 South is your best bet. This route is usually less congested, and you can reach your destination in under 30 minutes during off-peak hours. However, if you want to avoid tolls, Saw Mill River Parkway South is a good alternative.

During peak hours, Saw Mill River Parkway South can be quite slow, so it's better to avoid it if possible. If you have to take this route, make sure to leave early to avoid getting stuck in traffic.

In conclusion, the best route for you depends on your priorities. If speed is essential, I-684 South is the way to go. If you want to avoid tolls, you can take Saw Mill River Parkway South instead. Regardless of which route you choose, make sure to check traffic conditions before you start driving to avoid delays.